804536
12
Zoom out
Zoom in
Previous page
1/132
Next page
12 English
Replacing the exhaust filter
1. Unlock and remove the filter cover.
2. Push the filter casing locking mechanism upwards
and remove the filter casing.
3. Remove the exhaust filter from the filter casing.
4. Insert a new exhaust filter in the filter casing.
5. Insert the filter casing and latch it into place.
6. Fit and lock the filter cover.
Replacing the motor protection filter
1. Unlock and remove the filter cover.
2. Press the motor protection filter lock upwards. Re-
move the old motor protection filter and dispose of it.
3. Fit and lock the new motor protection filter.
4. Fit and lock the filter cover.
Replacing the roller brush
Please make sure that the bracket is always completely
opened during installation.
1. Fold the bracket on the side section fully upwards
and remove the side section.
2. Pull out the old roller brush and dispose of it.
3. Insert a new roller brush in the side section.
4. Push the side section together with the roller brush
into the device.
5. Fold the bracket fully downwards to lock the side
section.
Troubleshooting guide
DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
Remove the blockage
Suction pipe/suction hose
Suction hose at brush head
Roller brush/brush head
Note
Remove the brush cover if necessary to make the work
easier (see "Cleaning the roller brush").
Motor not running
No electrical voltage present
Check the power socket and power supply fuse.
Check the mains cable and the mains plug of the de-
vice.
Check the mains cable plug connection at the han-
dle.
The thermal protection switch has switched off the mo-
tor due to overheating
Check the filter and suction hose. Replace the used
filter or remove the blockage from the suction hose.
Allow the appliance to cool down.
Rattling noise when switching off
Note
The roller brush is equipped with a slip clutch that re-
leases to protect the roller brush from damage when ex-
cessively large or blocking objects are sucked in.
Note
The clutch only engages again when the device is
switched off, which results in a loud rattling noise if the
foreign object has not been removed.
Check the roller brush for blocking objects and re-
move these if present. The noise is no longer pres-
ent when the device is switched on again.
Unsatisfactory vacuuming result
Check the roller brush for blocking objects and re-
move these if present.
Remove blockages from the brush head, suction
pipe and suction hose.
Replace the filter bag.
Replace the exhaust filter or motor protection filter.
Set the fibre height selection knob to the correct set-
ting .
Replace the roller brush.
Filter indicator lamp lights up
orange
Remove blockages from the brush head, suction
pipe and suction hose.
Replace the filter bag.
Customer Service department
If the malfunction cannot be corrected, the device must
be checked by the Customer Service department.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher CV 30-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher CV 30-1 in the language / languages: All languages as an attachment in your email.

The manual is 9.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info