804536
10
Zoom out
Zoom in
Previous page
1/132
Next page
10 English
This device is suitable for commercial use, e.g. in
hotels, schools, hospitals, factories, shops, offices,
and rental companies.
Symbols on the appliance
Type plate
Further important device specifications are provided on
the type plate. The type plate is located on the rear of
the device casing.
Device elements
1Mains cable
2Mains power cable connection
3Suction pipe/suction hose
4Brush head lock
5Fibre height selection button
6Filter cover
7Filter cover lock
8Main switch
9Handle
10 Brush cover rotary lock
11 Side section bow
12 Side section
13 Filter bag lock
14 Filter bag
15 Motor protection filter
16 Filter casing
17 Exhaust filter
18 Suction hose at brush head
19 Handle adjustment
20 Cable hook, rotating
21 Cushion nozzle
22 Crevice nozzle
23 "Filter" indicator lamp
24 Indicator tuft
25 Roller brush
Installation
Install the loose parts for handle provided with the de-
vice before using the device for the first time.
See page 4 for illustrations
1Handle with mains power cable
2Handle metal tube
3Suction pipe and suction hose
1. Open the handle adjustment.
2. Push the metal pipe of the handle into the mount all
the way to the lowest latching position (latches audi-
bly twice).
3. Insert the handle into the metal pipe and latch into
place. Take care to ensure that the mains cable is
not jammed or twisted.
4. Pull the handle to the first (uppermost) latching po-
sition.
5. Close the handle adjustment.
6. Insert the suction hose into the connection nozzle.
7. Insert the suction pipe into the mount on the device
Startup
Installing the filter bag
1. Unlock and remove the filter cover.
2. Turn the filter bag lock to the right to unlock.
3. Insert the filter bag and turn the filter bag lock to the
left to lock.
4. Fit and lock the filter cover.
Connecting the mains power cable to the
device
1. Open the cable holder at the handle.
2. Plug the mains cable provided into the socket on the
device.
3. Secure the plug connection against unintentional
unplugging using the cable holder on the handle.
Use only the mains cable provided and only replace it
with an equivalent cable in the case of damage (see
"Technical data").
Operation
Adjusting the height of the handle
The height of the handle is adjustable.
See page 4 for illustrations
1. Open the handle adjustment.
2. Move the handle up or down to set the desired
height.
3. Close the handle adjustment.
Switching on the device
1. Connect the mains plug.
2. Switch on the device at the main switch.
Roller brush operation
1. Adjust the fibre height using the fibre height selec-
tion knob on the brush head.
2. Perform cleaning.
Setting for long pile carpets
Setting for short pile carpets
Filter status indicator (see "Trouble-
shooting -Remove the blockage")
Identifies the access to the roller brush
in the side section (see "Replacing the
roller brush")
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher CV 30-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher CV 30-1 in the language / languages: All languages as an attachment in your email.

The manual is 9.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info