519331
16
Zoom out
Zoom in
Previous page
1/78
Next page
16 English
Please follow the safety instructions before
start-up!
1 Power cord with plug
2 Connection G1“(33.3mm) Pressure
pipe
3 Filling nozzle with pre-filer and standing
pipe
4 Connection G1“(33.3mm) Suction pipe
5 Discharge opening with flow meter
6ON/OFF switch
7 Operation buttons
8 Overpump time indication.
9 Backflow valve
Illustration
" Install backflow valve on suction side
using thread seal tape.
" Connect anti-vacuum suction hose with
integrated backflow valve on the suction
side.
(available as optional accessory)
" Connect the pressure side for noise re-
duction to the pressure pipe via flexible
hose.
" To make subsequent empting of the
system and pressure release easier, we
recommend you install a shut-off valve
between pump and pressure line.
(not included in delivery)
By closing the shut-off valve when emp-
tying the pump you can prevent water
from escaping from the pressure line.
Illustration
" Unscrew the lid of the filling nozzle and
fill in water till it overflows.
" Screw on the lid on the filling nozzle.
" Open existinng locking valves in the
pressure pipe and empty rest water.
" Insert the plug into the socket.
" Turn on the machine.
" Wait until pump suction is established
and uniform, and then close the shut-off
valve on the pressure line.
The flow meter switches the pump off
after a short overpump time.
Caution
System is under pressure!
Illustration
" Tip: When using the pump as a garden
pump, raise the pressure hose to ap-
prox. 1m to reduce the suction time.
Caution
Missing water supply is detected by the flow
meter. If the first transport does not suc-
ceed in the first 4min, a failure on the suc-
tion side is detected and displayed by
blinking the lights. Afterwards, the pump is
switched off.
Tip: For failure description see the chapter:
"Troubleshooting".
" Turn off the appliance.
" Disconnect the main plug from the sock-
et.
" Rinse the pump after every use if you
use to transport water with additives.
Start up
Description of the Appliance
Preparing the Appliance
Operation
Finish operation
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher BPE 4000-45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher BPE 4000-45 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info