Manual Karcher BPE 4000-45 (page 15 of 78) (English, German, Dutch, French, Italian, Portuguese, Spanish)

519331

Zoom out

Zoom in

1/78

English 15

! Do not use the power cord to carry/

transport the machine.

! To separate the machine from the

mains, pull the plug and not the power

cord.

! Do not scrape the power cord across

sharp edges and ensure that it does not

get pressed.

! Do not operate the appliance continu-

ously in rain or during humid weather.

! The voltage indicated on the type plate

must correspond to the voltage of the

electrical source.

! To avoid risks, all repairs and replace-

ment of spare parts may only be carried

out by the authorised customer service

personnel.

! Do not use this pump as an immersion

pump.

! When using the pump near to pools,

garden ponds or fountains, observe a

minimum distance of 2m and safeguard

the device against slipping into the wa-

ter.

! Follow the rules for electrical safety of

equipment:

Only operate pumps near to pools, gar-

den ponds or fountains, if they are

equipped with an earth leakage circuit

breaker with a nominal error current of

max. 30 mA. It is not permitted to acti-

vate the pump, if persons are in the pool

or garden pond.

For safety reasons, we recommend that

you operate the appliance only via a

earth-leakage circuit breaker (max. 30

mA).

The electrical connection of the system

may only be performed by a qualified

electrician. Please follow the respective

national regulations!

In Austria pumps to be used in swim-

ming pools and garden ponds should be

equipped with a fixed connection line

according to ÖVE B/EN 60555 Part 1 to

3; power supply should be via a ÖVE-

tested isolating transformer whereby

the secondary nominal voltage should

not exceed 230V.

The automatic house water system main-

tains the pressure in the mains automatical-

ly. The pump is turned on if the pressure

falls below 0.16MPa (1.6 bar). The pump

remains turned on while water extraction is

detected by the flow meter (flow greater

than 300 l/h). Shortly after water extraction

is finished, the pump is turned off. The sys-

tem is now under pressure. In the case of

renewed water extraction and the resulting

pressure drop, the pump starts again.

The pump remains turned on for a 10s pe-

riod (“overpump time”) after the extraction

is finished to build up the required pressure

again. This period can be adjusted if need-

ed.

It should be increased if the pump is fre-

quently switched on and off (in the case of

reduced water extraction or system leak-

age).

Under ideal conditions, it can be reduced to

save energy.

Use the + / - buttons to adjust the overpump

time. The active light shows the current set-

ting (20s/10s/5s/3s).

In case of failure, the device is turned off

and the lights blink.

Restart the pump by simultaneously press-

ing the + / - buttons.

Operations

System operation

Settings

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher BPE 4000-45 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher BPE 4000-45 Manual

Product: