804749
20
Zoom out
Zoom in
Previous page
1/300
Next page
- 7
Remove the rubber strip and clean the
channel with a cloth. After cleaning, re-
place the rubber strip evenly.
Loosen the lock of the wiper flap.
Push the bearing lid down and remove.
Pull out the brush rollers.
Note: The brush rollers must be re-
placed when the bristle length has
reached 10 mm.
Insert a new brush roller.
Reassemble the bearing lid in the re-
verse sequence.
Repeat process on the opposite side.
Press the pedal for changing the brush-
es downward beyond its resistance.
Pull the disc brush out of the side below
the cleaning head.
Hold the new disc brush under the
cleaning head, push upward and lock.
Push the appliance forward about 2 m
so that the steering rollers point toward
the rear.
Press the pedal for lowering the clean-
ing head downwards slightly and then
move it to the left. This unlocks the ped-
al. Release the pedal slowly upwards.
The lift arm of the cleaning head will be
lowered.
1 Spring element
2 Locking pin
3 Terminal strip cover
4 Lock of safety pin
5 Excenter lever
Remove the terminal strip cover.
Place the cleaning head halfway in front
of the appliance.
Connect the mains supply cable of the
cleaning head to the appliance.
Attach the terminal strip cover.
Connect the hose couplers on the cleaning
head to the hose on the appliance.
1 Push handle
2 Cleaning head
Insert the push bow into the cleaning
head intake.
1 Safety splint
Insert the locking pins from below into
the mount of the cleaning head.
1 Safety splint
2 Linch pin
Insert the linch pin through the locking
pins and fold the locking rings forward.
1 Excenter lever
2 Locking pin
Open the excenter lever of the slideable
intake on the lift arm.
Press the cleaning head all the way
against the push handle.
Note: The less play the cleaning head
has after being installed, the less vibra-
tion will occur during cleaning.
Move the intake and insert the safety
pin and lock it into place.
Close the excenter lever.
Swivel the water reservoir all the way
down, check the lock.
The removal will take place in the opposite
order of the installation.
CAUTION
When the cleaning head is removed, the
stability of the appliance can be compro-
mised; ensure a safe stance.
Possibly support the rear to prevent tipping.
Please observe the following warning notes
when handling batteries:
Clean water distribution channel
Replacing the brush rollers
Replacing the disk brushes
Install cleaning head
Dismantling the cleaning head
Batteries
Observe the directions on the bat-
tery, in the instructions for use and
in the vehicle operating instructions
Wear eye protection
Keep children away from acid and
batteries
Danger of explosion
Fire, sparks, naked flames and
smoking must be strictly avoided
Danger of chemical burns
First aid
Warning note
Disposal
Do not throw the battery into the
regular waste
20 EN
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher B80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher B80 in the language / languages: All languages as an attachment in your email.

The manual is 40.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info