733569
23
Zoom out
Zoom in
Previous page
1/28
Next page
EN | 23
EN
DAB+ Menu
1. To enter the DAB+ menu, press and hold the MENU button for 2 seconds.
2. Navigate the menu by pressing the TUNE or buttons and enter submenus or conrm
selections by pressing the SELECT button.
Inside the menu there are the following options:
< Full scan > < Manual tune
>
< DRC > < Prune > < SYSTEM >
Press SELECT
to start full fre-
quency scan.
Manually select
frequency using
the TUNE
/
buttons.
Press SELECT
to select a de-
sired frequency.
This function
reduces the
dierence
between the
loudest and
quietest audio
being broad-
cast. Eective-
ly, this makes
quiet sounds
comparatively
louder, and
loud sounds
comparatively
quieter.
Note: DRC
only works if it
is enabled by
the broadcaster
for a specic
station.
Deletes all
invalid sta-
tions from the
station list.
Submenus available:
Backlight Timeout
Set a time after which
the display back-
light automatically
switches o (10 to
180 seconds.
Select “ON” to keep
the backlight on at all
times.
Lan-
guage
Select between dier-
ent menu languages.
Factory
Reset
Reset the product to
its factory settings (all
user settings will be
erased).
SW ver-
sion
Shows the software
version currently
installed.
FM Radio
1. Switch the unit on as described previously.
2. Select the FM radio mode by pressing the SOURCE button in case the unit is not already in FM
radio mode. The frequency will be shown in the display.
3. Select a desired radio station by pressing the TUNE or button repeatedly (each press of
the button changes the frequency by 0.05 MHz).
4. To automatically search for the next available radio station, press and hold for 2 seconds the
TUNE or button.
For a better reception completely unroll the FM wire antenna.
Radio Station Presets
This unit enables you to store up to 20 radio stations.
1. Tune to a radio station which you would like to store.
2. Press and hold for 2 seconds the PROG button. The presets will start ashing (e.g. “1”).
3. Select a desired preset place from 1 - 20 on which you want to store the current frequency by
pressing the TUNE or button.
4. Press the SELECT button to conrm your setting.
5. Repeat steps 1 - 4 to store up to 20 frequencies.
6. To recall a stored frequency, press the PROG button once and then select the desired preset by
pressing the TUNE or button. Then press SELECT to play that preset.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio UR1309D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio UR1309D in the language / languages: English, German as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info