733569

Karcher Audio UR1309D Manual

21
Zoom out
Zoom in
Previous page
1/28
Next page
EN | 21
EN
Volume Control
• Increase the volume by pressing the VOL ▲ button.
• Decrease the volume by pressing the VOL ▼ button.
Display Backlight & Timeout Function
The display backlight can be set in 4 levels (High / Medium / Low / O).
• To select between the settings press the DIMMER button repeatedly.
If you would like to have the display backlight switch o automatically after a certain time (Timeout
Function) rather than having the backlight on steadily, you can do so in the DAB+ or FM menu:
• While in radio mode (DAB+ or FM) press and hold for 2 seconds the MENU button to enter the
menu. Navigate to the submenu TIMEOUT (under System settings). Here you can select the time
after which the backlight will dim down again automatically (ON, 10 to 180 seconds).
• When you select “ON”, the display backlight will remain at the set level and not switch o.
Note:
• For a description on how to navigate through the menus, see the chapters “DAB+ Radio” and
“FM Radio”.
Sleep Timer
The sleep function enables you to set a countdown timer after which the unit will turn itself into standby
mode automatically.
• While in any mode, repeatedly press the SLEEP button until you’ve reached the desired sleep
timer duration (10 - 90 minutes in 10 minute intervals).
• The display will show the sleep indicator and the unit will switch to standby mode after the set
duration.
• To check how much time is left on the set timer, press the SLEEP button once.
• To cancel the sleep function, repeatedly press the SLEEP button until you’ve reached “00”.
Initial Setup
When you switch the unit on for the rst time, it will start up in DAB+ mode and automatically scan for
available radio stations. After the full scan is nished, the unit will play the rst found station.
Time is synchronized automatically with the DAB+ signal, so the clock does not need to be set manu-
ally.
Clock
Clock Synchronization
By default the clock is set to be synchronized automatically with radio signals (see “Initial Setup”).
If you would like to set the clock manually, you can do so as follows:
Manual Clock Setting
The clock can only be set while the unit is in standby mode.
1. While the unit is in standby mode, press the MENU button to enter the main menu. “Set Clock”
will be shown as rst menu item. Press the SELECT button to enter the clock setting.
2. Select between 12h display and 24h display by pressing the TUNE / buttons. Conrm your
setting by pressing the SELECT button.
3. The hours will start ashing. Set the current hours by pressing the TUNE / buttons. Press
the SELECT button again.
4. The minutes will start ashing. Set the current minutes by pressing the TUNE / buttons.
5. Press the SELECT button again to conrm all settings. The time is now set.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio UR1309D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio UR1309D in the language / languages: English, German as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info