733568
20
Zoom out
Zoom in
Previous page
1/24
Next page
20 | EN
4. Set the desired minutes by pressing the TUNE / buttons.
5. Press the ALARM 1 (or ALARM 2) button again to select the wake up mode.
6. Select between CD, buzzer (“bU”) or radio (“rd”) by pressing the TUNE / buttons.
7. Press the ALARM 1 (or ALARM 2) button again. The alarm is now set and will come on at the
set time.
Activating/Deactivating an Alarm
To deactivate a set alarm, press the ALARM 1 (or ALARM 2) button while the unit is in standby
mode. The alarm 1 icon (or alarm 2 icon) will disappear from the display. This alarm is now deac-
tivated and will not ring.
To activate an alarm, press the ALARM 1 (or ALARM 2) button while the unit is in standby mode
to enter the alarm setting.
Stopping an Active Alarm
When the alarm is sounding, press the STANDBY button to turn it off. The alarm will come on
again on the next day at the set time.
Snooze Function
The snooze function allows you to delay an active alarm for approximately 9 minutes. To do so, press
the SNOOZE button once while the alarm is active. The alarm will stop and come on again after ap-
proximately 9 minutes. During this time the alarm icon is ashing in the display.
To cancel the snooze function, press the STANDBY button.
Radio
1. Switch the unit on as described previously.
2. Select the radio mode by pressing the SOURCE button in case the unit is not already in radio
mode. The frequency will be shown in the display.
3. Select a desired radio station by pressing the TUNE or button repeatedly (each press of
the button changes the frequency by 0.05 MHz, however, the display only shows one digit behind
the point and the decimal is ashing).
4. To automatically search for the next available radio station, press and hold for 2 seconds the
TUNE or button.
For a better reception completely unroll the FM wire antenna.
Radio Station Presets
This unit enables you to store up to 20 radio stations.
1. Tune to a radio station which you would like to store.
2. Press the CLOCK/PROG button. The presets will start ashing (e.g. “P 01”).
3. Select a desired preset place from P 01 - P 20 on which you want to store the current frequency
by pressing the ■ SLEEP/MEM button.
4. Press the CLOCK/PROG button again to conrm your setting.
5. Repeat steps 1 - 4 to store up to 20 frequencies.
6. To recall a stored frequency, press the ■ SLEEP/MEM button until you reach the desired preset.
Note:
If the unit gets disconnected from the power supply, all stored channels will be lost and will have
to be reset.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio UR1308 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio UR1308 in the language / languages: English, German as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info