733571
28
Zoom out
Zoom in
Previous page
1/32
Next page
28 | EN
3. Select a desired preset (1 - 20) on which you want to store the current station by pressing the
or button on the remote control.
4. Press the Prog button to conrm your setting. “Stored” will be shown in the display.
5. Repeat steps 1 - 4 to store up to 20 frequencies.
6. To recall a stored station press the Preset -/+ buttons on the unit or the Preset ▲/▼ buttons on
the remote control.
Automatically Store Radio Stations
Instead of storing stations manually, they can also be stored automatically:
1. Press the Scan button on the remote control.
2. The unit will start an automatic search and store found stations consecutively in the presets (up
to 20).
Once the search is complete the rst found station will be played.
3. To recall a stored station press the Preset -/+ buttons on the unit or the Preset ▲/▼ buttons on
the remote control.
Notes:
To rene the auto-scan you can set the unit inside the FM menu to search only for stations with
strong signal and to “force mono“ (see section “FM Menu“).
Stations that may have been stored manually previously will be overwritten.
RDS (Radio Data System)
This product is equipped with an RDS decoder. RDS allows text information to be transmitted by a ra-
dio station together with the audio broadcast. This text information can include name of the radio sta-
tion, name of the current program or song, news headlines, etc. and may vary from station to station.
To display different info contents, repeatedly press the Display or Menu/INFO button.
Notes:
Not all radio stations transmit RDS information. In such cases the unit will not show any informa-
tion.
RDS information broadcast may vary from station to station.
If the radio signal is weak, transmission of RDS information may be disturbed or not shown
properly.
FM Menu
1. To enter the FM menu, press and hold the Stop/Menu/Info button on the remote control for 2
seconds.
2. Navigate the menu by pressing the / buttons on the remote control and enter submenus or
conrm selections by pressing the Play/Pause/Select button on the remote control.
Inside the menu there are the following options:
< Scan setting > < Audio setting > < SYSTEM >
Select whether the unit should scan
for all stations or only stations with
strong signal when automatically
tuning.
When “Forced mono” is selected, all sta-
tions will be broadcast in mono mode. In
areas with weak signal, the broadcast qual-
ity may be improved by this.
Same as in DAB+ menu.
USB
Playing MP3 les from USB
1. Insert a USB stick into the USB port on the unit.
2. Switch the unit on and select the USB mode by pressing the
Source button on the unit repeat-
edly or by pressing the USB button on the remote control.
28


Need help? Post your question in this forum.

Forumrules
1

Forum

karcher-audio-ra2030d

Reset search

  • I would like to have the user manuel in french
    is it possible ?
    Thanks Submitted on 6-2-2023 at 17:47

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio RA2030D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio RA2030D in the language / languages: English, German as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info