733571
24
Zoom out
Zoom in
Previous page
1/32
Next page
24 | EN
or the according button on the remote control.
Volume Control
Increase the volume by pressing the Volume + button on the unit or the remote control.
Decrease the volume by pressing the Volume - button on the unit or the remote control.
Mute
To mute the sound, press the
Mute button on the unit or the remote control. Press the button
again to turn the sound back on.
Dynamic Bass Boost (DBB)
This feature enhances the bass performance. Press the DBB button on the remote control to
activate/de-activate this feature.
Equalizer (EQ)
This unit is equipped with 5 different equalizer presets (Normal, Pop, Jazz, Rock, Classic).
To select between these presets, repeatedly press the EQ button on the remote control.
Display Dimmer
The display backlight can be adjusted in 3 levels (high, medium, off).
To select between these levels, repeatedly press the Dimmer button on the unit, or press and
hold for 2 seconds the Dimmer button on the remote control.
When the unit is switched into standby-mode, the display backlight will be switched off. In
standby-mode it can be set the same way as in on-mode.
Display Modes
Press the Display button on the remote control repeatedly while in USB playback mode to show
different information (e.g. time or ID3 tags if those are contained in the les on the USB).
Press the Display button on the remote control while in radio mode (DAB+ or FM) to display dif-
ferent information (e.g. date, broadcast info).
Initial Setup
When you switch the unit on for the rst time, it will start up in DAB+ mode and automatically scan for
available radio stations. After the full scan is nished, the unit will play the rst found station.
Time and date are synchronized automatically with the DAB+ signal, so the clock does not need to be
set manually.
Time & Date Setting
Clock Synchronization
By default the clock is set to be synchronized automatically with radio signals (see “Initial Setup”).
If you would like to set the clock manually, you can do so as follows:
Manual Clock Setting
There are two ways to set the clock manually:
1. When the unit is in standby-mode:
1. Press the Clock button on the unit to enter the clock setting mode. The hour starts ashing.
Select the current hour using the buttons Tuning / on the unit.
2. Press the Clock button again. The minute starts ashing. Select the current minute using the
buttons Tuning / .
3. Press the Clock button again. The day starts ashing. Select the current day using the but-
24


Need help? Post your question in this forum.

Forumrules
1

Forum

karcher-audio-ra2030d

Reset search

  • I would like to have the user manuel in french
    is it possible ?
    Thanks Submitted on 6-2-2023 at 17:47

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio RA2030D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio RA2030D in the language / languages: English, German as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info