652991

Karcher Audio RA 2040 Manual

24
Zoom out
Zoom in
Previous page
1/28
Next page
24 | EN
• To turn the light on, press the LIGHT ON/OFF button on the unit.
• The direction of the light can be adjusted. Only do this carefully.
• To turn the light off, press the LIGHT ON/OFF button once again.
Sleep Function
When the unit is switched on you can select a time intervall after which the unit switches itself auto-
matically into standby mode.
• Press the SLEEP button on the remote control repeatedly until the desired time is reached. The
display will show “SLEEP”.
• With the sleep timer activated you can check how much time is left until the unit switches itself
into standby by pressing the SLEEP button once.
• To deactivate the sleep timer, press the SLEEP button repeatedly until “SLEEP” disappears from
the display.
Radio
Playing the Radio
1. Press the POWER button to switch the unit on.
2. Press the FUNCTION button to select the FM Radio function (“FM” is shown in the display).
3. To automatically tune to the previously/next available radio station, press and hold for 2 seconds
the |◄◄ or ►►| button. The tuning will stop at the rst station found.
4. To manually tune to a radio station, press the |◄◄ or ►►| button repeatedly until you reach the
desired frequency.
5. This unit supports FM Stereo reception. If a station is found which broadcasts in stereo, the
display will show the stereo symbol.
Station Memory
This unit enables you to store up to 20 radio channels.
1. Search for a desired radio station as described above.
2. To store this radio station in the memory, press the PROG. button on the unit or the MEM PROG
button on the remote control. The rst memory preset “P01” will blink in the display.
3. By pressing the |◄◄ / ►►| buttons, select the preset (P01 - P20) on which you would like to
store the tuned in radio station.
4. Press the PROG. button the unit or the MEM PROG button on the remote control ance again to
conrm.
5. Repeat steps 1 - 4 to store up to 20 radio stations.
Note: A stored frequency can only be erased by storing another frequency in its place.
Selecting a Stored Radio Station
In order to recall a stored radio station, turn on the radio and press the M-/M+ buttons repeatedly until
you reach the desired memory preset.
Note: When you disconnect the AC power or in case of a power outage, the preset stations will be lost
and must be reset, unless you have backup batteries installed.
CD Player
CD Playback
1. Press the POWER button to switch the unit on.
2. Press the FUNCTION button to select the CD function (CD symbol is shown in the display).
3. Press the OPEN/CLOSE button to open the CD drawer.
4. Insert a disc with the printed side facing up. Ensure that the disc is inserted correctly.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio RA 2040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio RA 2040 in the language / languages: English, German as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info