652991

Karcher Audio RA 2040 Manual

23
Zoom out
Zoom in
Previous page
1/28
Next page
EN | 23
EN
Basic Functions
Setting the Clock
1. While the unit is in standby mode, press and hold for 2 seconds the PROG. button on the unit or
the TIME SET button on the remote control. The hour will blink.
2. Set the desired hour by pressing the |◄◄ / ►►| buttons.
3. Press the PROG. button or TIME SET button again. The minutes will start blinking.
4. Set the desired minute by pressing the |◄◄ / ►►| buttons.
5. Press the PROG. button or TIME SET button again to select between 24 and 12 hour display.
6. Press the PROG. button or TIME SET button again to conrm all settings. The time is now set.
Setting an Alarm
1. While the unit is in standby mode, press and hold for 2 seconds the AL. SET button on the unit or
on the remote control. The alarm icon (Alarm 1) appears and the hour is blinking.
2. Set the desired hour of Alarm 1 by pressing the |◄◄ / ►►| buttons.
3. Press the AL. SET button again. The minutes will start blinking.
4. Set the desired minutes of Alarm 1 by pressing the |◄◄ / ►►| buttons.
5. Press the AL. SET button again. You can now select whether the alarm should go on to Buzzer,
Radio or CD:
Wake to Buzzer:
This is the default setting (no indication on the display above the time).
Wake to Radio:
Press the |◄◄ / ►►| buttons until “FM” is shown in the display (above the time). At the set time
the alarm will go on at the radio station you last listened to.
Wake to CD:
Press the |◄◄ / ►►| buttons until the CD icon is shown in the display (above the time). This
feature only works when you have a CD inserted in the CD drive. This CD will be played at the
set alarm time.
6. Press the AL. SET button again to conrm your settings for Alarm 1.
7. The alarm icon (Alarm 2) appears and the hour is blinking.
8. Repeat steps 1 - 6 in order to set Alarm 2.
To select which of the 2 alarms should be active, press the AL. SET button repeatedly while the unit
is in standby mode (clock display). The display will show consecutively the Alarm 1 icon, then Alarm 2
icon, then both Alarm icons. Press the AL. SET button once again to deacitvate the alarms (no alarm
icon will be displayed).
Snooze Function:
The snooze function allows you to delay an active alarm for 9 minutes. To do so, press the SNOOZE
button on the remote control once while the alarm is active. “SNOOZE” will appear in the display. The
alarm will stop and come on again after 9 minutes. To turn off the snooze function and the alarm, press
the POWER button.
Turning Off the Alarm:
To switch off an alarm while active, press the POWER button on the unit or on the remote control.
Adjusting the Volume
• To increase the volume, press the VOL+ button on the unit or on the remote control.
• To decrease the volume, press the VOL- button on the unit or on the remote control.
LED Downlight
This unit is equipped with an LED downlight for your workspace.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio RA 2040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio RA 2040 in the language / languages: English, German as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info