652947

Karcher Audio MC 6540BT Manual

19
Zoom out
Zoom in
Previous page
1/24
Next page
EN | 19
EN
Snooze Function
The snooze function allows you to delay an active alarm for 9 minutes. To do so, press the SNOOZE
button once while the alarm is active. The alarm will stop and come on again after 9 minutes. The
alarm icon will be ashing during this period. To turn off this function, press the respective ALARM
button (1 or 2).
Sleep Function (via Remote Control)
The sleep function enables you to set a countdown timer after which the unit will turn itself into standby
mode automatically.
• While listening, repeatedly press the SNOOZE button on the remote control to select a desired
countdown after which the radio will turn itself off automatically.
• You can select 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes. “SLEEP” will be shown in the display.
• To check the remaining time on the countdown, press the SNOOZE button once.
• If you want to cancel the function, press the SNOOZE button repeatedly until “00” appears in the
display. “SLEEP” will disappear from the display.
Equalizer Presets
While listening, repeatedly press the EQ button to change the euqalizer preset. You can select be-
tween Flat, Rock, Classic, Pop, Jazz.
Radio
1. Switch the unit on as described previously.
2. Press the FUNCTION button repeatedly to select “RADIO”. The frequency will be shown in the
display.
3. Select a desired radio station by pressing the or button repeatedly.
4. To automatically search for the next available radio station, press and hold for 2 seconds the
or button.
5. If a station is broadcasting stereo, you can press the FM ST button for best sound. If a station is
bradcasting in mono, it is usually better to turn FM ST off.
6. For the best FM reception completely unroll the FM wire antenna.
Radio Station Presets
This unit enables you to store up to 20 radio stations.
1. Tune to a radio station which you would like to store.
2. Press and hold for 2 seconds the PRESET button. The presets will start ashing (e.g. “P01”).
3. Select a desired preset place from P01 - P20 on which you want to store the current frequency by
pressing the or button.
4. Press the PRESET button again to conrm your setting.
5. Repeat steps 1 - 4 to store up to 20 frequencies.
6. To recall a stored frequency, repeatedly press the PRESET button until you reach the desired
preset.
CD Operation
Playing Discs
1. Switch the unit on and select the CD mode by pressing the FUNCTION button.
2. Press the EJECT button to open the CD compartment.
3. Insert a disc with the printed side facing outward.
4. Press the EJECT button again to close the CD compartment.
5. The CD is being read and the total no. of tracks will be displayed.
6. Press the PLAY/PAUSE button to start the playback.
7. To temporarily stop the playback (pause), press the PLAY/PAUSE button once. Press the but-
ton again to resume playback.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio MC 6540BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio MC 6540BT in the language / languages: English, German as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info