652947
18
Zoom out
Zoom in
Previous page
1/24
Next page
18 | EN
Power Supply
The unit requires DC 9V 2.0A .
Plug the supplied adaptor cable into the connector on the back of the unit and the other end into
a suitable wall socket.
Make sure that the output power of the wall outlet matches the required power of the adaptor.
Adaptor must be plugged in to operate. The unit does not operate on batteries.
Basic Functions
Switching the Unit On & Off
1. Power the unit as described above.
2. The unit is now in standby mode and the time will be shown in the display.
3. To switch the unit on, press the STANDBY button.
4. To switch the unit off into standby mode, press the STANDBY button once again.
Clock Setting
The clock can only be set while the unit is in standby mode.
1. While the unit is in standby mode, press the CLK SET button. The time format will be shown.
2. Select between 12h display and 24h display by pressing the / buttons.
3. Press the CLK SET button again. The hours will start ashing.
4. Set the current hours by pressing the / buttons.
5. Press the CLK SET button again. The minutes will start ashing.
6. Set the current minutes by pressing the / buttons.
7. Press the CLK SET button again to conrm all settings. The time is now set.
Alarm Setting
An alarm can only be set while the unit is in standby mode.
This unit enables you to set 2 separate alarms. You can select to wake to CD, radio or buzzer.
1. While the unit is in standby mode, press and hold for 2 seconds the ALARM 1 or ALARM 2 but-
ton. The symbol
(or ) and the hour of alarm 1 (or alarm 2) will ash.
2. Set the desired hour by pressing the / buttons.
3. Press the ALARM 1 (or ALARM 2) button again. The minutes will start ashing.
4. Set the desired minutes by pressing the / buttons.
5. Press the ALARM 1 (or ALARM 2) button again to select the wake up mode.
6. Select between CD, radio, or buzzer by pressing the / buttons.
Activating/Deactivating an Alarm
To activate a previously set alarm, press the respective ALARM button (1 or 2) while the unit is
in standby mode. The alarm symbol
(or ) appears in the display. This alarm will now ring at
the previously set time.
To deactivate a set alarm, press the respective ALARM button (1 or 2) while the unit is in standby
mode. The alarm symbol
(or ) will disappear from the display. This alarm is now deacti-
vated and will not ring.
Checking a Set Alarm
Press the INFO button to check at what times and modes the alarms are set.
Stopping an Active Alarm
When the alarm is sounding, press the ALARM 1 or ALARM 2 button to turn it off. The alarm
icon will disappear from the display. You must activate the alarm again in order for it to function
again the next day.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio MC 6540BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio MC 6540BT in the language / languages: English, German as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info