652945
18
Zoom out
Zoom in
Previous page
1/36
Next page
18 | EN
repeat the current track. “REPEAT” will be shown in the display.
press the MODE button on the unit or the PROG/MODE button on the remote control twice to
repeat all tracks. “REPEAT ALL” will be shown in the display.
press the MODE button on the unit or the PROG/MODE button on the remote control repeatedly
until all repeat indicators disappear from the display to deactivate the repeat function.
Random Play
At any time during playback, press the MODE button on the unit or the PROG/MODE button on
the remote control repeatedly until “RDM” will be shown in the display.
All tracks will now be played in random order.
Press the MODE button on the unit or the PROG/MODE button on the remote control repeatedly
until all indicators disappear from the display to deactivate the random function.
Programming Track Order
You can store up to 20 tracks in a desired sequence.
1. While in CD stop mode, press the MEM button on the unit or the PROG/MODE button on the
remote control. “PGM” will be shown and “P01” will be ashing.
2. Using the / buttons, select the track to be played rst in the sequence.
3. Press the MEM button or the PROG/MODE button again. “P02” will be shown in the display.
4. Repeat the steps 2 - 3 to select up to 20 tracks for your sequence.
5. Press the PLAY/PAUSE button to start the playback of your sequence.
Note:
After all programmed tracks have been played, the CD player will return to the stop mode. To
clear the programmed tracks from the memory, press the STOP button until “PGM” disappears
from the display.
Other Functions
Sleep Timer
The sleep function enables you to set a countdown timer after which the unit will turn itself into standby
mode automatically.
While listening, press the SLEEP button. “120” and “SLEEP” will be shown in the display.
Press the SLEEP button repeatedly to select a desired countdown after which the radio will turn
itself off automatically.
You can select 120, 90, 60, 45, 30, 15 or 5 minutes.
Headphone Connector
You can connect stereo headphones (not included) to the headphone connector of this unit. When
headphones are connected the unit speakers will be deactivated. To listen over the unit speakers
again, disconnect the headphones.
AUX Input
You can connect the audio output of an external device such as an MP3 player to this unit to listen to
the sound of that device through the amplier of this music system.
1. To connect the external device please use a standard stereo audio cable (3.5 mm to 3.5 mm
plugs) (not included) to connect the headphone out or audio line out of the external device to the
AUX input socket of this unit.
2. Switch the unit on and select the AUX mode “AU” by pressing the FUNCTION button.
3. Switch the external device (e.g. MP3 player) on.
4. Start playback of the external device and adjust the volume control of the main unit to the desired
level.
5. Remember to switch off the unit when you are nished using the external device.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio MC 6510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio MC 6510 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info