652940
25
Zoom out
Zoom in
Previous page
1/28
Next page
EN | 25
EN
in the CD changer:
1. Set the unit into CD mode.
2. Press the MEM/CLK-ADJ button.
3. Press the button to select the desired disc.
4. Using the SKIP- and SKIP+ buttons, select the track to be played rst in the sequence.
5. Press the MEM/CLK-ADJ button again to store the track in the memory.
6. Repeat the steps 3 - 5 to select up to 60 tracks for your sequence.
7. Press the PLAY/PAUSE button to start the playback of your sequence.
8. To stop playback press the STOP ■ button once. Press it twice to delete the program sequence.
Cassette
General Operation
Key Function
STOP/EJECT Press to stop all deck operations. Press again to open the cassette door.
FAST FORWARD &
FAST REWIND
Press to start rapid tape winding in either forward or reverse direction.
Press STOP/EJECT key when the cassette spool stops turning.
PLAY Press to start playback of a tape.
PAUSE Press to pause playback. Press again to resume playback.
RECORD (deck 1 only) Press together with PLAY key to start tape recording.
Playback
1. Set the unit into tape mode by pressing the TAPE button.
2. Put a cassette tape into one of the cassette decks.
3. Press the PLAY key to start playback.
4. Adjust the volume to a desired level.
5. To pause playback press the PAUSE key. Press it again to resume playback.
6. To stop playback press the STOP/EJECT key.
Recording
A. Recording from tape (deck 2 to deck 1)
You can duplicate a pre-recorded tape to another tape (deck 2 (playback) to deck 1 (recording)):
Dubbing at normal speed:
1. Set the unit into tape mode by pressing the TAPE button.
2. Insert a pre-recorded cassette into deck 2 and a blank cassette tape into deck 1.
3. Press the PAUSE key and then the RECORD and PLAY keys at deck 1.
4. Press the PLAY key at deck 2 to start playback and press the PAUSE key at deck 1 to start dub-
bing.
5. When nished press PAUSE key at deck 1 and STOP key at deck 2.
Dubbing at high speed:
This unit is equipped with a high speed dubbing system which can save the time for dubbing by 2/3
compared to normal speed:
Press the DUBBING button to “HI” position and then follow the same procedure as described
above under “Dubbing at normal speed”.
When dubbing a pre-recorded cassette tape at high speed a chattering sound is being heard. To
avoid this set the volume to a minimum level.
Do not switch between high speed dubbing and normal speed dubbing during the dubbing pro-
cess as this will vary the speed of the recording and may damage the cassette tape.
B. Recording from radio
1. Set the unit into radio mode by pressing the TUNER button.
2. Tune to the desired radio station and insert a blank cassette tape into deck 1.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio KA 5300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio KA 5300 in the language / languages: English, German as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info