733549
24
Zoom out
Zoom in
Previous page
1/32
Next page
24 | EN
6. First Installation & Basic Functions
First Installation
1. Place the unit at a location where the signal is good.
2. For best possible reception, the rod antenna should be fully extended and adjusted as needed.
3. When you power the unit for the rst time, it will automatically switch to DAB+ mode and do a full
scan. Once the scan is nished the rst found station will be played.
Switching the Unit On & Off (Standby Mode)
1. Power the unit as described above.
2. To switch the unit on, press the Power button on the remote control once, or press and hold for
2 seconds the /MODE button on the unit. The unit will switch to the last mode used.
3. To switch the unit off (standby mode), press the Power button on the remote control once, or
press and hold for 2 seconds the /MODE button on the unit.
Mode Selection
To select between DAB+, FM, and AUX modes, you can either
press the /MODE button on the unit and then select the
desired mode using the NAVIGATE knob and then pressing
OK, or
press the MODE button (to select in the menu) on the
remote control, or
press the DAB+, FM, or AUX button on the remote control.
Volume Control
Increase the volume by pressing the
VOLUME+ button on the remote control or rotating the
VOLUME knob on the unit clockwise.
Decrease the volume by pressing the VOLUME- button on the remote control or rotating the
VOLUME knob on the unit counter-clockwise.
Mute
To mute the sound, press the MUTE button on the remote control or on the unit. Press the but-
ton again to turn the sound back on.
Equalizer (EQ)
This unit has 6 different equalizer presets (Normal, Classic, Jazz, Pop, Rock, Speech). To select
between these presets, repeatedly press the EQ button on the remote control.
In the Systems Settings menu you can also set and select your own equalizer preset.
Display Backlight & Timeout Function
The display brightness can be adjusted in 3 levels (high, medium, low).
To select between these levels, repeatedly press the DIMMER button on the remote control.
Note:
If set to Low or Medium level, the backlight will automatically switch to the High setting when a
button is pressed. To keep the backlight at the same setting when pressing a button, you need
to turn on the “Timeout” function inside the System Settings menu (Menu -> System Settings ->
Backlight -> Timeout -> On or time after which the display should automatically dim down).
Sleep Timer
The sleep function enables you to set a timer after which the unit will turn itself into standby mode
automatically.
While in any mode, press the SLEEP button on the remote control repeatedly to set the
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio DAB5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio DAB5000 in the language / languages: English, German as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info