803829
10
Zoom out
Zoom in
Previous page
1/128
Next page
10 English
Press the fan level operation button repeatedly until
the desired level is reached.
The selected fan level is displayed on the control
panel.
Setting the timer
The timer can be set to 2, 4, 6 or 8 h run time. When the
set time has elapsed, the device switches off automati-
cally. The fan level can be changed at any time.
Symbol for the timer operation button:
Switching on: Press the Timer operation button re-
peatedly until the desired run time is reached. The
display lights up. The set run time is displayed in the
control panel.
Switching off: Press the Timer operation button until
the timer display goes out. Timer is off.
Lock / unlock control panel
To prevent accidental change of settings, e.g. by chil-
dren or pets, the control panel can be locked.
Symbol for the lock operation button and display for
control panel:
Lock: Press the button for 3 seconds.
Unlock: Press the lock button for 3 seconds.
Display PM 2.5 air quality
The display shows the concentration of fine dust (PM
2.5) numerically in the unit µg/m³. In addition, a colour
index provides information about the air quality:
Transport and storage
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during transport
and storage.
Store the device only in dry indoor rooms.
Care and service
Cleaning
DANGER
Danger of death from electric shock
Liquids can conduct electricity and thus cause serious
or fatal injuries.
Always disconnect the power supply unit from the sock-
et before cleaning and maintenance work.
Never immerse the device or the power supply unit in
water.
Never use wet cloths to clean the device or the power
supply unit.
1. Switch off the device.
2. Unplug the power supply unit from the socket.
3. Wipe the device with a soft, dry cloth. Do not use
abrasive or corrosive detergents.
Replacing the filter
The filter should be changed after 2500 - 3000 hours of
operation at the latest. If the device becomes louder, an
unpleasant smell emanates from the device (filter) or
the filter is visibly dirty, it should be changed at an earlier
stage. The symbol flashes in the display to remind you
of a required filter change.
Symbol for the operation button for filter reset:
Depending on the service life, the following number of
symbols is displayed:
1. Switch off the device, and disconnect the power
supply unit from the socket and device.
Illustration J
2. Turn the device over, and turn the filter cover lock 45
degrees clockwise.
Illustration B
3. Remove the filter cover.
Illustration C
4. Remove the filters.
Illustration D
5. Unpack the new filters.
Illustration E
6. Insert the unpacked filters. Ensure that the draw
shackles are visible and point inwards.
Illustration F
7. Put on the filter cover and turn the lock 45 degrees
anticlockwise. Turn the device over with the display
facing upwards.
Illustration G
8. Connect the power supply unit to the device and
socket.
9. Switch the device on.
a To reset the filter (Reset), press the symbol
for 3 seconds.
Illustration K
Troubleshooting guide
Malfunctions often have simple causes that you can
remedy yourself using the following overview. When in
doubt, or in the case of malfunctions not mentioned
here, please contact your authorised Customer Service.
PM 2.5 Air quality Colour
0 - 60 Good Blue
61 - 120 Moderate Yellow
>120 Poor Red
Display for service life of filter (h)
2401 - 3000
1801 - 2400
1201 - 1800
601 - 1200
1 - 600
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher AF 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher AF 20 in the language / languages: All languages as an attachment in your email.

The manual is 5.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info