803829
9
Zoom out
Zoom in
Previous page
1/128
Next page
English 9
Description of the device
For the illustrations, refer to the graphics page.
Illustration A
1Operation button for Device On / Off
2Operation button for Function lock
3Display PM 2.5 Air quality index
4Operation button for Switch off display
5Display for fan level
6Operation button for Auto mode On / Off
7Fan level operation button
8Operation button for Sleep mode On / Off
9Timer display
10 Operation button for Timer
11 Filter service life display
12 Operation button for Filter reset
13 Air quality display and device display
14 Filter cover lock
15 Filter cover
16 Filter tab
17 filter
18 Connection for power supply unit
19 Device sensor
20 Power adapter
Note
The function settings are only possible via the operation
buttons and not via the displays.
Inserting the filter
Before initial start up, the fine filters already installed in
the unit must be unpacked.
1. Turn the device over, and turn the filter cover lock 45
degrees clockwise.
Illustration B
2. Remove the filter cover.
Illustration C
3. Remove the packed filters.
Illustration D
4. Unpack the filters.
Illustration E
5. Insert the unpacked filters. Ensure that the draw
shackles are visible and point inwards.
Illustration F
6. Put on the filter cover and turn the lock 45 degrees
anticlockwise. Turn the device over with the display
facing upwards.
Illustration G
7. Place the device on a level surface. Ensure that a
distance of 30 cm is maintained to each side.
Illustration H
Note
Do not place the device on hot surfaces or in the imme-
diate vicinity of the room heating.
Do not allow any liquids or foreign bodies (e.g. metallic
objects) to enter the device.
8. Insert the plug of the power supply unit into the de-
vice and insert the mains plug into the socket.
Illustration I
The device is ready for operation.
Note
The first time you use the device, we recommend allow-
ing it to run overnight to perform an initial basic cleaning
of your room.
Note
The table with the hours of the display symbols for the
filter service life, see Replacing the filter
Operation
Switching the device on/off
1. To switch on the device: Press the on/off button on
the device.
Illustration I
The device starts automatically.
Note
After the system is switched on, the displays and but-
tons on the control panel light up briefly. The integrated
air quality sensor measures the air quality in the room
automatically.
2. If required, the following functions, for example, can
be set via the operation buttons:
Fan level
Auto mode
Sleep mode
Timer
3. To switch off the device: Press the On/Off switch of
the device.
The displays and buttons on the control panel go
out. The device is switched off.
Setting auto mode
In automatic mode, the air purifier sets the appropriate
fan level depending on the air quality.
In the event of poor air quality, for example, the fan level
is automatically set high.
Symbol for the auto mode operation button:
Press the auto mode operation button. The auto-
matic mode is switched on or off.
Setting sleep mode
In sleep mode, the fan runs at the lowest speed and is
therefore very quiet. All light symbols are off.
Press the sleep mode operation button. The sleep
mode is switched on or off.
Symbol for the sleep mode operation button:
Setting the fan level
Depending on the air quality, the fan level can be man-
ually set to level I, II or III. If the air quality is poor, for ex-
ample to filter out smoke, the blower should run at
maximum speed (level III) for 15 - 20 minutes.
Note
To clean the air effectively, keep windows and doors
closed while the air purifier is switched on.
Symbol for the fan level operation button:
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher AF 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher AF 20 in the language / languages: All languages as an attachment in your email.

The manual is 5.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info