Manual Kalkhoff Pedelec Impulse (page 25 of 76) (English, German, Dutch, French, Spanish)

516382

Zoom out

Zoom in

1/76

Quickstart Guide – Impulse 23

If, shortly aer setting o or during a

journey, the le-hand LED blinks briey

and then all LEDs ash, this means that

one of the problems described below is

present:

CAUSE SOLUTION

Spoke magnet has

slipped out of po-

sition

Make sure the spoke

magnet has not slipped.

It should be as close as

possible to the sensor on

the chain stay (max. 5 mm

clearance).

Speed sensor

defective

Have your specialist cycle

shop check and, if

necessary, repair it

Cable connection

defective

Have your specialist cycle

shop check and, if

necessary, repair it

No connection

between motor unit

and battery

›Connect the battery to

the charger

›Use a dierent battery

›Have your specialist

cycle shop check the

control cable that runs

om the battery plug to

the motor unit

Only on Pedelecs with back-pedal brakes:

If the le-hand LED begins to ash with a

long ash, followed by short ashes om

all LEDs, this means that you must carry

out the system check for correct nction

of the switch for operating the back-pedal

brake again or that the pedal positions

were not recognised correctly. In this

case, move the pedals forward once and

then back once, until you can feel some

resistance. If the ashing signal disap-

pears you can ride o normally. If the

ashing signal continues, you can ride as

if you were riding a bike without power

assist. Have a specialist dealer check your

error message and recti the problem.

5 LCD display

5.1 Control panel

The control panel on the handlebar grip

features four or ve buttons (depending

on the model). The LCD display is located

in the middle of the handlebars, in other

words in the centre of the rider’s eld of

view.

On the right-hand side of the control

panel is the ON/OFF button. Press once to

switch the system on and press a second

time to switch it o.

The arrow buttons used to control the

level of assistance are located on the le-

hand side of the control panel.

The “Set” button is located between the

arrow buttons. It can be used to request a

variety of displays.

If the model features pushing assistance,

the switch for this will be on the under-

side of the control panel.

My motor stops working more adn more frequently. I have to turn the battery on and off again to fix for a few days or seconds. I have made sure the magnet is correctly placed.

When turning off I get an error code COO5. What must I do? Submitted on 31-1-2021 at 14:09
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Pedelec Impulse in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2.94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Pedelec Impulse

Kalkhoff Pedelec Impulse User Manual - English, German - 48 pages

Kalkhoff Pedelec Impulse User Manual - Dutch - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kalkhoff Pedelec Impulse Manual

Product: