725632
24
Zoom out
Zoom in
Previous page
1/64
Next page
EN-24 Original User Guide | Pedelec Integrale 0.5 Version 2
3. Secure the rear wheel at the through-axle using a 12-14 Nm tightening
torque.
4. Finally, secure all the cables and lines once again to the cycle frame
with zip ties and perform a nal function test.
WARNING
Be sure to ensure the correct cable layouts as an incorrectly laid cable
may become caught in the brake disc, drive or in the spokes, and
cause the wheel to lock leading to a fall. In addition to your repair
tools, also carry 5 cable ties with you so that you can secure any
cables which come loose during a journey.
3.12.2 Attaching wheels with quick-release axles*
Removing the front wheel
1. Remove the Pedelec battery.
2. Open the quick-release skewer on the
front wheel by turning it down 180˚.
You will now usually be able to see the
word ‘OPEN’ on the inside of the lever.
3. Hook the quick-release skewer into the slot and turn it anticlockwise
until the quick-release axle protrudes from the axle hole about 1 cm.
4. Lift out the front wheel and remove the quick-release axle.
Quick-release
skewer
For 2. Open the quick-release skewer
PLEASE NOTE
Detach all cables from the wheel (e.g. lighting cables), otherwise you
could tear them.
5. Remove the front wheel.
Replacing the front wheel
1. Apply a thin layer of grease to the quick-release axle.
2. Push the wheel into the front forks
and align with the axle holes.
3. Reinsert the quick-release axle.
4. Move the quick-release lever to the open position.
5. Hook the quick-release skewer into the slot and turn it clockwise.
This will screw the axle in the thread. Ensure that the wheel is
correctly centred.
6. Close the quick-release skewer by swinging the lever by 180˚. You will
now usually be able to see the word ‘CLOSE’ on the outside of the
lever.
Quick-release
skewer
For 6. Close the quick-release skewer
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Neodrives Integrale at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Neodrives Integrale in the language / languages: English as an attachment in your email.

The manual is 9,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Neodrives Integrale

Kalkhoff Neodrives Integrale User Manual - German - 66 pages

Kalkhoff Neodrives Integrale User Manual - Dutch - 64 pages

Kalkhoff Neodrives Integrale User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info