725632
23
Zoom out
Zoom in
Previous page
1/64
Next page
Original User Guide | Pedelec Integrale 0.5 Version 2 EN-23
3.12 Wheel
3.12.1 Changing the wheel
3.12.1.1 Axle nut
Removing the rear wheel
Note and/or remember the cable layout as well as the
mounting points for the zip ties before removing the drive
wheel.
1. First of all, loosen and remove all zip ties which secure the cables from
the motor, as well as cables and lines for other components on the
bicycle frame.
2. Release the rim brake if tted.
3. If a derailleur is installed, switch to the lowest pinion.
4. Loosen the through-axle using a 6 mm Allen key and remove the axle.
Hold the rear wheel rmly while doing this.
5. Dismount the torque arm and pull the plug out of the motor. You can
now completely remove the rear wheel.
Pay attention to the installation position of the torque arm.
When later reattaching the wheel, this must be installed in
the exactly same position as prior to removal.
Note that the motor comprises an additional weight, and as
a result, the rear wheel will be heavier than usual.
Replacing the rear wheel
1. Mount all the components removed from the wheel in accordance with
the instructions and specications of the respective manufacturer.
WARNING
Make sure that all the components attached to the wheel are
installed in accordance with the instructions and specications of the
respective manufacturer. This applies in particular to the brake and
gear shift.
2. Then lift the rear wheel into the frame. Before sliding it completely
into the frame mount (the drop-out), insert the motor plug into the
motor and place the torque arm on the spline.
PLEASE NOTE
Before plugging the motor plug into the motor, check both the plug
and socket for moisture.
Always use the pinion set originally provided by the cycle
manufacturer. Using any other brand can result in limited
functionality and/or abrasion on the rear of the pinion set.
WARNING
Never mount the motor without the torque arm. Doing this would
result in total loss (break-o of the cables). All warranty and
guarantee claims would be voided in this case.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Neodrives Integrale at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Neodrives Integrale in the language / languages: English as an attachment in your email.

The manual is 9,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Neodrives Integrale

Kalkhoff Neodrives Integrale User Manual - German - 66 pages

Kalkhoff Neodrives Integrale User Manual - Dutch - 64 pages

Kalkhoff Neodrives Integrale User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info