778421
31
Zoom out
Zoom in
Previous page
1/70
Next page
Originalbetriebsanleitung Allgemein EN-31
21.1 Checking the bearing play
Proceed as follows to check whether the headset is too
loose:
1. Grip the upper ball socket with your thumb and
forenger.
2. Actuate the front brake with your left hand and move
the bicycle gently forwards and backwards.
3. If the headset is too loose, there will be signicant
jerking on the upper ball socket.
4. If you feel jerking in the upper ball socket, the bearing
play must be reduced.
A headset that is too tight will be sti:
1. Lift the bicycle by its frame so that the front wheel is
o the ground.
2. If the handlebars only move sluggishly and unequally
from one side to the other, the bearing play must be
increased.
21.2 Adjusting a screw headset
1. Loosen the lock nut by turning this counterclockwise
using a wrench.
2. To reduce the bearing play, turn the upper ball socket
clockwise using a wrench. To increase the bearing
play, turn the upper ball socket counterclockwise
using a wrench.
3. Hold the upper ball socket with a wrench so that the
bearing play does not change again.
4. Now, tighten the lock nut again by turning this
clockwise using a wrench 13. Tightening torques for
threaded connections Page EN-19.
5. Check the bearing play again 21.1 Checking the
bearing play Page EN-31 and adjust as required.
21.3 Adjusting Ahead headsets
21.3.1 Ahead headset I
To adjust the bearing play on this type of headset, the front
stem must be readjusted. You should therefore contact your
specialist workshop for this adjustment work.
1. Loosen the clamping screws counterclockwise.
2. Turn the adjustment screw clockwise to reduce the
bearing play.
3. Once the bearing play is set correctly, centre and
secure the front stem by tightening the clamping
screws clockwise to the specied tightening torque
using a torque wrench 13. Tightening torques for
threaded connections Page EN-19.
21.3.2 Ahead headset II
To adjust the bearing play for this type of headset, there is
no need to readjust the front stem, which means that you
can perform this adjustment yourself, if you think you can.
Reducing the bearing play:
1. To reduce the bearing play, turn the adjustment screw
clockwise. The plastic tab in the setting window will
move to the left.
2. If the bearing play is still too high and the plastic tab
has already reached the end of the setting window,
turn the adjustment screw counterclockwise until the
plastic tab once again reaches the start of the setting
window.
3. Loosen the clamping screw on the clamping ring by
turning it counterclockwise a few turns.
4. Then, push the clamping ring towards the head tube.
Align the clamping and threaded rings on the front
stem.
5. Tighten the clamping screw clockwise to the specied
tightening torque using a torque wrench.
6. Turn the adjustment screw clockwise until the desired
bearing play is reached.
7. The clamping ring should t ush beneath the front
stem. If the front stem must be readjusted in order to
achieve this, please contact your specialist workshop
about this.
Increasing bearing play:
1. To increase the bearing play, turn the adjustment
screw counterclockwise. The plastic tab will move to
the right at the same time.
22. Bicycle fork
The front wheel is held in place by the
bicycle fork. The bicycle fork consists of
two fork blades, a fork bridge and a fork
steerer tube. If you own a carbon fork, be
sure to read 6.3 Carbon: general safety
information Page EN-13. The majority of
bicycles are tted with suspension forks.
Suspension forks are often adjustable, and
oer greater riding comfort.
Fig. 38
Suspension fork
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff 2021 in the language / languages: English as an attachment in your email.

The manual is 5.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff 2021

Kalkhoff 2021 User Manual - German - 72 pages

Kalkhoff 2021 User Manual - Dutch - 71 pages

Kalkhoff 2021 User Manual - French - 74 pages

Kalkhoff 2021 User Manual - Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info