Manual K-rain RPS46 (page 21 of 26) (English)

685872

Zoom out

Zoom in

1/26

Follow these steps:

1. Turn power off to the controller.

2. Disconnect 24 Volt power leads from the plug pack at the

controller 24VAC terminals.

3. Clearly mark or identify all valve wires according to the terminals

they are connected to, (1 to 6). This allows you to easily wire them

back to the controller, maintaining your valve watering sequence.

4. Disconnect valve wires from the terminal block.

5. Remove the complete unit from the wall.

6. Carefully wrap the complete unit in protective wrapping and pack

in a suitable box. Return to your service agent or the manufacturer.

NOTE: Tampering with the unit will cancel the Guarantee.

7. Replace your controller by reversing this procedure.

SERVICING THE CONTROLLER

The controller should always be serviced by an authorised agent.

I am not too sure on the wiring outside the house onto valves and solenoids. My fuses keep blowing so I was wondering if I could get a diagram for this please thanks. Submitted on 6-5-2021 at 17:04
Reply Report abuse
I would like a photograph of the wire hookups to the solenoids and valves outside as my fuse keeps blowing please thanks. Submitted on 6-5-2021 at 16:55
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of K-rain RPS46 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

K-rain RPS46 Manual

Product: