29867
13
Zoom out
Zoom in
Previous page
1/36
Next page
10
VOLUME
Turning On the Power
To turn on the unit, press STANDBY/ON .
The STANDBY lamp on the unit goes off.
When you press the source buttonCD 3/8,
TAPE 2 3, FM/AM/DAB, and AUX, the unit
automatically turns on.
To turn off the unit (on standby), press STANDBY/ON
again.
The STANDBY lamp on the unit lights red.
The clock flashes on the display until you set the built-in
clock. After setting the clock, the clock time will appear on
the display while the unit is in standby mode.
A little power is always consumed even while the unit is in
standby mode.
To switch off the power supply completely, unplug the AC
power cord from the AC outlet.
Turning Off the Unit Automatically
(Auto Standby)
Using Auto Standby, the unit automatically turns itself off (on
standby) about 3 minutes after playing back a disc or a tape.
You can also turn off the unit automatically by using the
Sleep Timer. (See page 29.)
On the remote control ONLY:
To activate Auto Standby, press A.STANDBY.
The A.STANDBY indicator appears on the display.
When the playback is stopped, the A.STANDBY
indicator starts flashing on the display.
To deactivate Auto Standby, press A.STANDBY again.
The A.STANDBY indicator goes off.
STANDBY/ON
A. STANDBY
Selecting the Source
To select the source, press CD 6, TAPE 2 3, FM/AM/
DAB, or AUX.
When you select CD or TAPE as the source, playback starts
automatically.
To operate the CD player, see pages 12 to 15.
To operate the tape deck, see page 16.
To operate the tuner (FM, AM (MW) or DAB), see pages 17
to 24.
To record on a tape, see pages 25 and 26.
To use an external equipment, see page 24.
Adjusting the Volume
You can adjust the volume level only while the unit is turned
on. The volume level can be adjusted between Volume
MIN, Volume 1 Volume 31, and Volume MAX.
The volume level has no effect on recording.
To increase the volume, press VOLUME + (or
turn VOLUME control clockwise on the unit).
To decrease the volume, press VOLUME (or
turn VOLUME control counterclockwise on the
unit).
When you press and hold either button, you can change the
volume level continuously.
For private listening
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers. Be sure to turn down the volume before
connecting or putting on the headphones.
When you turn off the unit with the volume level is
over Volume 20.
The volume level is automatically set to Volume 20 next time you
turn on the unit.
DO NOT turn off (on standby) the unit with the
volume set to an extremely high level; Otherwise,
the sudden blast of sound can damage your
hearing, speakers and/or headphones when you
turn on the unit or start playing any source.
REMEMBER you cannot adjust the volume level
while the unit is in standby mode.
Continued
09-11_UX-HB4[B]6.p65 04.8.5, 6:16 PM10
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC UXHB4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC UXHB4 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info