29867
12
Zoom out
Zoom in
Previous page
1/36
Next page
9
Common Operations
Setting the Clock
Before operating the unit any further, first set the units clock.
When you plug in the power cord, 0:00 starts flashing on
the display.
You can set the clock when the unit is in standby mode.
On the remote control ONLY:
1
Press CLOCK for more than 2
seconds.
Clock setting appears on the display.
2
Press UP or DOWN to select the
clock synchronization setting,
then press SET.
On The units clock is adjusted
automatically with the FM RDS
signal on next time you tune in to an
FM station.
Off The units clock is adjusted manually.
The time system indication starts flashing.
3
Press UP or DOWN to adjust the
time system, then press SET.
12H The hour indication is displayed with
a 12-hour system (with AM or
PM).
24H The hour indication is displayed with
24-hour system.
The hour indication starts flashing.
4
Press UP or DOWN to adjust the
hour, then press SET.
When you press and hold UP or DOWN,
the hour indication changes continuously.
The clock is working even while setting.
The minute indication starts flashing.
5
Press UP or DOWN to adjust
the minute, then press SET.
When you press and hold UP or DOWN, the
minute indication changes continuously.
The day of the week indication starts flashing.
6
Press UP or DOWN to adjust
the day of the week, then press
SET.
Display brightness setting when the unit is in
standby mode appears on the display.
If you want to change the time setting, press
CANCEL repeatedly to return step
2
.
7
Press UP or DOWN to adjust
the brightness, then press SET.
The brightness level can be adjusted
between 0 (canceled) to 3 (most bright).
The greater number you set, the brighter the
display is.
The units clock starts working with the time you
adjusted.
When you unplug the AC power cord or if a power failure
occurs
The clock is reset to 0:00. If this happens, set the clock again.
The clock may gain or lose 1 to 2 minutes per month (when
the clock synchronization is turned off)
If this happens, set the clock again.
To adjust the clock
On the remote control ONLY:
1
Press CLOCK for more than 2 seconds
when the unit is in standby mode.
Clock setting appears on the display.
2
Repeat steps
2
to
7
of Setting the Clock
procedure.
CLOCK
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
SET
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
SET
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
SET
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
SET
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
SET
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
SET
CLOCK
09-11_UX-HB4[B]6.p65 04.8.5, 6:16 PM9
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC UXHB4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC UXHB4 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info