57099
20
Zoom out
Zoom in
Previous page
1/68
Next page
18
Selecting the analog or digital input
mode
When you have connected some components such as MD recorder, the
DBS tuner and so on, using digital terminals (see page 9), you need to
change the input mode for these components to the digital input.
You can choose digital sound from the following sources: “MD”,
“DBS”, “AUX”.
Primary remote control only:
1. Press the source selecting button (TAPE/MD, AUX,
or TV/DBS) for which you want to change the input
mode from analog input to digital input.
Example: Selecting MD recorder as the source for digital audio.
2. Press ANALOG/DIGITAL INPUT.
The display changes as shown below each time the button is
pressed.
= AUTO/PCM = DOLBY DGTL (DOLBY DIGITAL) = DTS =
ANALOG = (back to the beginning)
3. Press ANALOG/DIGITAL INPUT to select
[AUTO/PCM].
« After approximately 3 seconds
The source name changes from “MD” to “MD DIGITAL”.
When other than [AUTO/PCM] is selected
When “DOLBY DGTL” or “DTS” is selected the source name
changes to digital (“MD” = “MD DIGITAL”) and audio is not
played.
The decode mode indicator “DOLBY DIGITAL” or “DTS” in the
display window flashes to indicate that the correct mode has not
been selected.
Example: Selecting “DOLBY DGTL” when listening to MD
with digital audio.
1
2
Basic operations
Flashes
To return to analog audio
1. Select a digital source to return to analog audio.
Select from “MD DIGITAL”, AUX DIGITAL”, or “DBS
DIGITAL”.
2. Press ANALOG/DIGITAL INPUT to select [ANALOG].
Analog audio is selected and the source name also returns to
analog.
Note:
When selecting a digital source, press ANALOG/DIGITAL
INPUT once to display the currently selected mode.
Changing the decode mode
Primary remote control only:
1. Press DVD to select DVD as the source.
2. Press ANALOG/DIGITAL INPUT to select the
decode mode.
The display changes as shown below each time the button is
pressed.
= AUTO/PCM = DOLBY DGTL (DOLBY DIGITAL) = DTS
= (back to the beginning)
AUTO/PCM Optimized for all discs playable on this
system. (Default)
DOLBY DGTL Select this mode when playing a disc
recorded in Dolby Digital Surround.
DTS Select this mode when playing a DVD disc
recorded in DTS Surround.
The DTS decoder will be selected as the
internal decoder.
When to try changing the decode mode
When the decode mode is set to the default AUTO/PCM setting and
a DVD recorded in Dolby Digital Surround or DTS Digital Surround
is played, the internal decoder will be automatically selected before
audio playback begins. Depending on the disc, this may result in a
brief loss of audio after playback starts. This is due to lost audio
signals that were inputted during internal decoder selection.
In these instances, lost audio can be prevented by manually selecting
the decode mode appropriate for the disc you wish to play.
However, please note that when the decode mode is set to other
than AUTO/PCM, you will be unable to playback audio from discs
recorded in a mode other than the set mode.
After changing the decode mode and playing back a disc, return the
decode mode to “AUTO/PCM”.
Changing the playback source will automatically set the decode
mode to “AUTO/PCM”.
1
2
TH-A10[J]2/1 00.2.24, 14:4918
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC TH-A10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC TH-A10R in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC TH-A10R

JVC TH-A10R User Manual - English - 68 pages

JVC TH-A10R User Manual - Dutch - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info