Manual JVC SR-L910EK (page 21 of 28) (English)

45658

Zoom out

Zoom in

1/28

PAL

8 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK

8-1 Preparation

Connection

Make sure the output connectors on the rear panel are

properly connected.

Function menu switch settings

Set the function menu switches as required.

[SHARPNESS] . . . Factory setting: NORMAL

Set to SHARP to emphasize contours for sharper

playback pictures.

[INDEX SEARCH] . . . Factory setting: OFF

To enable or disable index search.

• Set to ON to search the alarm-recorded positions

(index code).

[NOISELESS PLAY] ... Factory setting: OFF

Set to "ON" to enable frame transport playback when

the picture recorded in the 12/24H Timelapse mode

contains much noise and is difficult to see. However,

there will be no sound output.

8-2 Playback

[STOP/EJECT] button

Playback mode

indication

[TIME MODE] button

[PLAY] button

[OPERATE] button

Press the [OPERATE] button to turn the operating mode

on.

[

The [OPERATE] indicator lights.

Press the [TIME MODE] button to set the Play mode to

the VHS Standard (3H).

The 3H indicator is shown on the display.

• To use playback in the Timelapse Play mode, make

sure the same mode (L12H or L24H) is set for

playback as was used for timelapse recording.

Load the recorded cassette correctly.

* If a cassette is loaded when the power is off, power is

switched on automatically (auto-power on function).

If the cassette's safety tab has been removed, power is

switched on and play starts automatically (auto play

function).

Press the [PLAY] button to start play.

The play indicator is shown on the display and

the Play mode is engaged.

• Cassettes recorded in the VHS Long Play mode

(LP) are played back in the VHS Long Play mode.

• "6H" is shown in the display.

To stop playback

Press the [STOP] button.

The tape stops and the Stop mode is engaged.

Audio playback of a timelapse-recorded tape

• Due to the difference in tape speed, audio signals

cannot be monitored when a tape recorded in the

L12H or L24H Timelapse mode is played back in the

VHS Standard (3H) mode.

To monitor audio recorded in the Timelapse mode,

play back the tape in the same mode (L12H or L24H)

as it was recorded in.

•

When a tape recorded in the VHS standard

(3H) mode is played back in the Timelapse

mode, noise appears in the playback picture.

•

Tapes recorded in the Long Play (LP) mode

can be played back only.

Still, Reverse Play and Shuttle Search modes

are not available with LP tapes.

Notes

Menu check during playback

•

When the [MENU] button is pressed during

playback, the monitor screen display switches from

the playback picture to the input video signal (EE

picture) and the main menu is shown on the screen.

This means that even during playback you can

check menu contents.

Press the [MENU] button again to restore the

playback picture.

PAL

8 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK

Shuttle search (reverse and fast-forward) playback

Fast-forward shuttle search

Press the [FF] button during playback.

The rewind search indicator is shown on

the display and the Reverse Shuttle

Search mode is engaged.

* No sound is output.

Reverse shuttle search

Press the [REW] button during play.

The fast-forward search indicator is shown

on the display and the Fast-Forward

Shuttle Search mode is engaged.

* No sound is output.

Shuttle search operations vary according to how the [REW] or [FF] button is pressed. Refer to the table below for details.

Operation of the [REW] or

[FF] button

Press the button once.

9 times normal speed (lock). Pressing the [PLAY] button restores the Normal Play mode.

Tape recorded in the Standard mode or the Timelapse mode

9 times normal speed. Releasing the finger restores the Normal Play mode.

Hold the button pressed

for more than 2 seconds.

Still, Reverse Play and Shuttle Search modes are not available with tapes recorded in the Long Play (LP) mode.

Note

[PLAY] button

[REW] button

[REVERSE] button

[FF] button

[PAUSE/STILL] button

8-3 Special-Effects Playback

Reverse playback

Press the [REVERSE] button in the Play or Still mode.

The reverse indicator is shown on the display

and the Reverse mode is engaged.

Reverse playback is executed at VHS SP mode speed.

When the play time mode is set to 3H,L12H, L24H, 12H

or 24H, reverse playback is executed at the VHS SP

mode’s speed.

* No sound is output.

To return to the Normal Play mode, press the [PLAY]

button.

Still and field/frame advance

Press the [PAUSE/STILL] button during playback.

The still indicator is shown on the display and a

still picture is displayed.

Ⅲ Each time the [PAUSE/STILL] button is pressed in the

Still mode, the picture is advanced one field.

Ⅲ Pressing and holding the [PAUSE/STILL] button for

more than 2 seconds in the Still mode, advances the

picture field by field in the forward

direction (continuous field advance

playback).

* No sound is output.

• In the Field Advance Playback mode, pressing the

[PAUSE/STILL] button engages the Still mode.

Press the [PLAY] button to restore the Normal Play

mode.

The Stop mode is automatically engaged if the VCR

remains in the Still mode for 5 minutes (approx.).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JVC SR-L910EK in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JVC SR-L910EK Manual

Product: