Manual JVC SR-L910EK (page 18 of 28) (English)

45658

Zoom out

Zoom in

1/28

A LARM / SENSOR REC MODE

(ALARM REC) ON

(SENSOR REC) OFF

(TIMER ALARM) ON

(DURATION) 180SEC

(BUZZER) OFF

(TAPE END MODE) STOP

PRESS (SHIFT, SET)

PRESS (MENU) TO END

7-4 Alarm Recording

Connect an alarm sensor to the rear panel

’s alarm input terminal.

Preparation

Press the [OPERATE] button to turn the operating mode

on.

Setting the function menu switches for the Alarm

Record mode

Press the [MENU] button to display the main menu

screen on the monitor.

Press the [SHIFT +/-] button to select <FUNCTION> and

press the [SET +/-] button.

[

The function menu switch setting screen is

displayed.

Press the [SHIFT +/-] button to display the alarm/sensor

recording mode setting screen.

Select the item to be set with the [SHIFT +/-] button. Set

the value with the [SET +/-] button.

• Set <ALARM REC> to ON to activate the alarm

recording function. The AL REC indication in the

display lights.

• Set the alarm recording duration.

Set duration to 5 sec., 15 sec., 30 sec., 60 sec.,

120 sec., 180 sec., TAPE END or MANUAL (for as

long as alarm signals are input).

* When the alarm recording time is set to MANUAL,

the alarm cue signal (index code) will not be

recorded correctly if alarm input lasts for less than

30 seconds.

* When alarm recording duration is set with an

external switcher, set the alarm recording duration

to MANUAL.

• To sound the buzzer during alarm recording, set

<BUZZER> to ON.

• Set the operation mode at tape end in the case when

alarm recording is executed even once with the menu

switch <TAPE END MODE> on the alarm/sensor

recording mode setting screen.

STOP : The tape stops.

REW : The tape is rewound to the beginning and

stops.

REPEAT : Recording continues from the beginning of

the tape.

EJECT : The tape is ejected.

After setting the function menu switches, press the

[MENU] button twice.

[

The normal screen is restored.

Check the time and data shown on the monitor's on-

screen display.

Ⅲ If the time and date are not shown on the monitor or if

7 RECORDING

Alarm recording function

Alarm/sensor recording

mode setting screen

you want to change the display position, use the

<POSITION> function menu switch.

Alarm recording duration

Buzzer

Tape end mode

Select the timelapse recording mode (L12H or L24H)

with the [TIME MODE] button on the front panel.

[

The selected recording mode is shown on the VCR's

display and the on-screen display.

Follow the procedures for "Basic recording operations"

on page 27.

When an alarm signal is input to the rear panel's

ALARM IN terminal, alarm recording is executed as

specified.

To stop alarm recording and clear the alarm indication,

press the [AL/PL RESET] button.

• When the AL indication is lit on the display (during

alarm recording), press the [AL/PL RESET] button to

stop alarm recording. Timelapse recording is resumed

and the AL indication goes out. If the alarm buzzer is

on, it stops as well.

• When the AL indication is blinking on the display,

press the [AL/PL RESET] button. The AL indication

goes out.

When the AL indication goes out, press the [AL/PL

RESET] button again to reset the alarm input/power loss

data.

* There may be some picture distortion at the start or

end of an alarm recording. This is not a malfunction.

A LARM / SENSOR REC MODE

(ALARM REC) OFF

(SENSOR REC) ON

(TIMER ALARM) ON

(DURATION) 180SEC

(BUZZER) OFF

(TAPE END MODE) STOP

PRESS (SHIFT, SET)

PRESS (MENU) TO END

7 RECORDING

7-5 Sensor Recording

Sensor recording is executed only when the VCR is in the Stop mode (Stop or Timer Record Standby mode) and an alarm

signal is input to the rear panel

’s ALARM IN terminal.

Perform the settings for sensor recording in the same way as for "Alarm Recording" on page 33.

The mechanism of the SR-L910E/EK cannot be guaranteed if the sensor recording function is used frequently (100 times/

day or more). If alarm inputs are frequent, use the alarm recording function instead and carry out regular maintenance/

inspection and parts replacement.

Preparation

Alarm/sensor recording

mode setting screen

Sensor recording function

Connect an alarm sensor to the rear panel

’s alarm input terminal.

Press the [OPERATE] button to turn the operating mode

on.

Setting the function menu switches for the Sensor

Record mode

Press the [MENU] button to display the main menu

screen.

Press the [SHIFT +/-] button to select <FUNCTION>

and press the [SET +/-] button.

[

The function menu switch setting screen is

displayed.

Press the [SHIFT +/-] button to display the alarm/sensor

recording mode setting screen.

Select the item to be set with the [SHIFT +/-] button. Set

the value with the [SET +/-] button.

• Set the <SENSOR REC> to ON to activate the sensor

recording function. The SENSOR REC indication in

the display lights.

• Set the sensor recording duration.

Set <DURATION> to 5 sec., 15 sec., 30 sec., 60 sec.,

120 sec., 180 sec., TAPE END or MANUAL (for as

long as alarm signals are input).

* The sensor recording time will be shorter than the

specified value.

* When the sensor recording time is set to MANUAL,

the alarm cue signal (index code) will not be

recorded correctly if alarm input lasts for less than

30 seconds.

* When sensor recording duration is set with an

external switcher, set the sensor recording duration

to MANUAL.

• To sound the buzzer during sensor recording, set

<BUZZER> to ON.

• Set the operation mode at tape end in the case when

sensor recording is executed even once with the menu

switch <TAPE END MODE> on the alarm/sensor

recording mode setting screen.

STOP : The tape stops.

REW : The tape is rewound to the beginning and

stops.

REPEAT: Sensor recording continues from the

beginning of the tape.

EJECT : The tape is ejected.

After completing function menu switch setting, press the

[MENU] button twice.

[

The normal screen is restored.

Check the time and data shown on the monitor's on-

screen display.

Ⅲ If the time and date are not shown on the monitor or if

you need to change the display position, use the

<POSITION> function menu switch.

• When an alarm signal is input to the rear panel's

ALARM IN terminal, recording starts automatically in

the specified record mode and the AL indication is lit.

• After the specified recording duration expires,

recording stops and the Stop mode is engaged.

* Because sensor recording starts from the Stop

mode, it takes several seconds from the time an

alarm input is received to the time recording actually

starts.

To stop sensor recording and clear the AL indication,

press the [AL/PL RESET] button.

To disable sensor recording, set menu switch

<SENSOR REC> to OFF.

During playback, there may be some noise or picture

distortion at the point where one sensor recording

stops and another starts. This is not a malfunction.

Sensor recording duration

Tape end mode

Buzzer

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JVC SR-L910EK in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JVC SR-L910EK Manual

Product: