495432
22
Zoom out
Zoom in
Previous page
1/75
Next page
17
Speaker settings
When selecting MEDIUM ROOM,
Center speaker delay time
is set to1 msec.
Surround speakers delay time
is set to 2 msec.
ANALOG
SUBWFR
VOL
LR
SUBWFR
FRNT SP
LFE
DIGITAL IN
AUTO SR
MODE
QUICK SETUP
(Back to the beginning)
CNTR SP
SURR DL
CROSS
CNTR DL
D.COMP
SURR SP
3
Turn MULTI JOG to select the appropriate setting
for the item selected in step
2
, then press SET.
Your setting is stored.
EX.: When selecting NO for SUBWFR.
4
If you would like to set other items, repeat steps
2
and
3
.
Setting the subwoofer information
SUBWFR (subwoofer)
Register whether you have connected a subwoofer or not.
YES*: Select when you have connected a subwoofer.
The subwoofer speaker indicator (
SUBWFR
) lights up
on the display (see page 14). You can adjust the
subwoofer output level (see page 22).
NO: Select when you have not connected or have
disconnected a subwoofer.
* Initial setting
Setting the speakers size
FRNT SP (front speakers), CNTR SP (center
speaker), SURR SP (surround speakers)
Register the sizes of all the connected speakers.
LRG (large): Select when the cone speaker size is larger than
12 cm.
SML (small)*: Select when the cone speaker size is smaller than
12 cm.
NO: Select when you have not connected a speaker. (Not
selectable for the front speakers.)
* Initial setting
NOTES
If you have selected SML (small) for the front speaker size, you
cannot select LRG (large) for the center and surround speaker
sizes.
If you have selected NO for the subwoofer setting (see above and
page 16), you can only select LRG (large) for the front speaker
size.
ANALOG
VOL
LR
2.7 m
C
2.4 m
2.1 m
L
R
LS
RS
When selecting LARGE ROOM,
Center speaker delay time
is set to 0 msec.
Surround speakers delay time
is set to 0 msec.
C
L
R
LS
RS
3.0 m
Setting the speakers and subwoofer
information manuallyManual Setup
You can set the following speakers and subwoofer information
manually as you prefer. When you change your speakers, register the
information again.
Subwoofer informationSUBWFR
Speaker sizeFRNT SP, CNTR SP, SURR SP
Speaker delay timeCNTR DL, SURR DL
Crossover frequencyCROSS
Low frequency effect attenuatorLFE
Dynamic range compressionD.COMP
Operating procedure
On the front panel ONLY:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
1
again.
1
Press SETTING.
MULTI JOG now works for the setting operation.
2
Turn MULTI JOG until the setting item you want
to set appears on the display, then press SET.
As you turn MULTI JOG, the indication changes as follow:
STANDBY / ON STANDBY
TV DIRECT SETTING ADJUST SURROUND
DVD MULTI DVD STB VCB TV FM / AM
SET / TUNER PRESET
SOURCE SELECTOR MASTER VOLUME
PHONES
/ MULTI JOG
CONTINUED ON THE NEXT PAGE
15-20.RX-ES1&XV-N55[B]f 03.2.18, 1:47 PM17
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC RX-ES1SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC RX-ES1SL in the language / languages: English as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info