546765
31
Zoom out
Zoom in
Previous page
1/64
Next page
28
On the front panel From the remote control
FM MODE
0
SBACKL
FM MODE
ANALOG
VOLUME
TUNED STEREO
L R
SPEAKERS
1
AUTO MUTING
ANALOG
VOLUME
TUNED
L R
SPEAKERS
1
Selecting the FM Reception Mode
When an FM stereo broadcast is hard to receive or noisy, you can
change the FM reception mode while receiving an FM broadcast.
You can store the FM reception mode for each preset station (see
page 27).
While listening to an FM station, press FM MODE.
Each time you press the button, the FM reception mode alternates
between FM AUTOMUTING and FM MODE MONO.
FM AUTOMUTING: Normally select this.
When a program is broadcasted in
stereo, you will hear stereo sound;
when in monaural, you will hear
monaural sounds. This mode is also
useful to suppress static noise between
stations. The AUTO MUTING indicator
lights up on the display. (Initial setting)
FM MODE MONO: Select this to improve the reception (but
stereo effect will be lost).
In this mode, you will hear noise while
tuning into the stations. The AUTO
MUTING indicator goes off from the
display. (The STEREO indicator also
goes off.)
4. Press MEMORY again while the
selected channel number is
flashing on the display.
The selected channel number stops flashing.
The station is assigned to the selected channel number.
5. Repeat steps 1 to 4 until you store all the stations
you want.
To erase a stored preset station
Storing a new station on a used number erases the previously stored
one.
To tune in a preset station
On the front panel:
1. Press FM/AM to select the band
(FM or AM).
The FM/AM lamp on the front panel button lights
up. The last received station of the selected band is
tuned in.
Each time you press the button, the band
alternates between FM and AM.
2. Press FM/AM PRESET 5 or
until you find the channel you
want.
Pressing FM/AM PRESET 5 increases the
number.
Pressing FM/AM PRESET decreases the
number.
From the remote control:
1. Press FM/AM to select the band
(FM or AM).
The FM/AM lamp on the front panel button lights
up. The last received station of the selected band is
tuned in.
Each time you press the button, the band
alternates between FM and AM.
2. Press the 10 keys to select a
preset channel number.
For channel number 5, press 5.
For channel number 15, press +10
then 5.
For channel number 20, press +10
then 10.
For channel number 30, press +10, +10,
then 10.
Note:
When you use the 10 keys on the remote control, be sure that they
are activated for the tuner, not for the CD and others. (See page 51.)
FM/AM
FM/AM PRESET
FM / AM
231
564
89
7/P
0
+1010
BOOST
FRONTL
MENU
ENTER
FRONTR
BASS
TEST
CENTER
SUBWFR
DIGITAL EQ
SBACKL
SBACKR
SURRL
SURRR
RETURN FM MODE 100
+
MEMORY
ANALOG
VOLUME
TUNED STEREO
L R
SPEAKERS
1
EN27-29.RX-8020V[UJ]_f 02.5.22, 9:49 AM28
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC RX-8020VBK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC RX-8020VBK in the language / languages: English as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info