546765
30
Zoom out
Zoom in
Previous page
1/64
Next page
27
Setting the AM Tuner Interval Spacing
Some countries space AM stations 9 kHz apart, and other countries use
10 kHz spacing.
To select the 10 kHz interval:
Be sure the receiver is turned off, but is plugged into an AC outlet. Hold
down FM/AM TUNING 5 and press STANDBY/ON
. “10k
STEP” appears on the display. Now the 10 kHz interval is selected.
To change back to the 9 kHz interval:
Be sure the receiver is turned off, but is plugged into an AC outlet. Hold
down FM/AM TUNING and press STANDBY/ON . 9k STEP
appears on the display. Now the 9 kHz interval is selected.
Tuning into Stations Manually
On the front panel:
1. Press FM/AM to select the band
(FM or AM).
The FM/AM lamp on the front panel button
lights up. The last received station of the
selected band is tuned in.
Each time you press the button, the band
alternates between FM and AM.
2. Press FM/AM TUNING 5 or
until you find the frequency you
want.
Pressing FM/AM TUNING 5 increases
the frequency.
Pressing FM/AM TUNING decreases
the frequency.
From the remote control:
1. Press FM/AM to select the band
(FM or AM).
The FM/AM lamp on the front panel button
lights up. The last received station of the
selected band is tuned in.
Each time you press the button, the band
alternates between FM and AM.
+
FM/AM TUNING
STANDBY/ON
STANDBY
FM/AM TUNING
+
STANDBY/ON
STANDBY
FM/AM
ANALOG
VOLUME
TUNED STEREO
L R
SPEAKERS
1
FM/AM TUNING
FM / AM
Receiving Radio Broadcasts
You can browse through all the stations or use the preset function to go immediately to a particular station.
2. Press TUNING UP 3 or
TUNING DOWN 2 until
you find the frequency you
want.
Pressing TUNING UP 3 increases the
frequency.
Pressing TUNING DOWN 2 decreases
the frequency.
Notes:
When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
When an FM stereo program is received, the STEREO indicator
also lights up.
When you hold and then release the button in step 2, the frequency
keeps changing until a station is tuned in.
DOWN TUNING UP
SET
/REW FF/
PAUSE
MEMORY
Using Preset Tuning
Once a station is assigned to a channel number, the station can be
quickly tuned in. You can preset up to 30 FM and 15 AM stations.
To store the preset stations
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 2 again.
On the front panel ONLY:
1. Tune in the station you want to preset (see
“Tuning into Stations Manually” on the left).
If you want to store the FM reception mode for this station,
select the FM reception mode you want. See Selecting the
FM Reception Mode on page 28.
2. Press MEMORY.
The channel number position starts flashing on the display for
about 10 seconds.
3. Press FM/AM PRESET 5 or to
select a channel number while the
channel number position is
flashing.
ANALOG
VOLUME
TUNED STEREO
L R
SPEAKERS
1
ANALOG
VOLUME
TUNED STEREO
L R
SPEAKERS
1
FM/AM PRESET
ANALOG
VOLUME
TUNED STEREO
L R
SPEAKERS
1
EN27-29.RX-8020V[UJ]_f 02.5.22, 9:48 AM27
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC RX-8020VBK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC RX-8020VBK in the language / languages: English as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info