546765
26
Zoom out
Zoom in
Previous page
1/64
Next page
23
2 Selecting Channel Numbers to Reproduce
Multi-channel Digital SoftwareEX/ES
[On-screen display] [Front panel]
You can select 5.1-channel reproduction or 6.1-channel reproduction
when playing back multi-channel (more than 5.1-channel) digital
software with setting the surround back speakers to LARGE or
SMALL (see page 22). AUTO is initial setting.
AUTO : Select this to reproduce signals originally recorded as
marked on the software such as
or .
When playing back Dolby Digital EX software (bearing
the mark
), DOLBY D EX (Dolby Digital EX)
activates using the surround back speaker(s).
When playing back Dolby Digital 5.1-channel software,
DOLBY D (Dolby Digital) activates without using the
surround back speaker(s).
When playing back DTS-ES Discrete software (bearing
the mark
), ES DSCRETE (DTS-ES Discrete)
activates using the surround back speaker(s).
When playing back DTS-ES Matrix software (bearing the
mark
), ES MATRIX (DTS-ES Matrix)
activates using the surround back speaker(s).
When playing back DTS Digital Surround 5.1-channel
software, DTS (DTS Digital Surround) activates
without using the surround back speaker(s).
ON : Select this to activate 6.1-channel reproduction using the
surround back speaker(s).
When playing back Dolby Digital EX software (bearing
the mark
), DOLBY D EX (Dolby Digital EX)
activates using the surround back speaker(s).
When playing back Dolby Digital 5.1-channel software,
DOLBY D EX (Dolby Digital EX) activates using the
surround back speaker(s). Surround back channels are
reproduced using digital matrix processing.
When playing back DTS-ES Discrete software (bearing
the mark
), ES DSCRETE (DTS-ES Discrete)
activates using the surround back speaker(s).
When playing back DTS-ES Matrix software (bearing the
mark
), ES MATRIX (DTS-ES Matrix)
activates using the surround back speaker(s).
When playing back DTS Digital Surround 5.1-channel
software, DTS NEO:6 activates using the surround
back speaker(s). Surround back channels are reproduced
using digital matrix processing.
OFF : Select this to activate 5.1-channel reproduction without
using the surround back speaker(s).
When playing back Dolby Digital EX software (bearing
the mark
) or DTS-ES software (bearing the mark
), the surround back signals are output from the
surround speakers mixed with the surround signals.
When playing back Dolby Digital or DTS Digital
Surround 5.1-channel software, conventional DOLBY D
(Dolby Digital) or DTS (DTS Digital Surround)
activates.
Note:
If you have selected NONE for the surround back speakers (see
page 22), you cannot select this setting. The 6.1-channel and 5.1-
channel software are played back as OFF is selected.
3 Setting the Speaker Distance
The distance from your listening point to the speakers is another
important element to obtain the best possible sound of the Surround
and DSP modes. You need to set the distance from your listening
point to the speakers.
By referring to the speaker distance setting, this unit automatically
sets the delay time of the sound through each speaker so that sounds
through all the speakers can reach you at the same time.
7
Measuring unitDIST UNIT
[On-screen display] [Front panel]
Select which unit you use.
meter : Select this to set the distance in meters.
feet : Select this to set the distance in feet.
7
Speaker distanceFRONT DIST, CENTER (CNTR)
DIST, SURR DIST, S BACK (SBACK) DIST
[On-screen display] [Front panel]
Set the distance from the listening point within the range of
0.3 m (1 ft) to 9.0 m (30 ft), in 0.3 m (1 ft) intervals.
Notes:
You cannot set the speaker distance for the speakers you have
selected NONE (see page 22).
This setting is not valid for the DVD MULTI playback mode.
2.1 m
(7 ft)
2.4 m
(8 ft)
2.7 m
(9 ft)
3.0 m
(10 ft)
3.3 m
(11 ft)
C
LR
LS RS
LSB
RSB
30˚
90˚
60˚ 60˚
90˚
30˚
EX. In the above case, set the speaker distance as follows:
FRONT DIST : 3.0 m or 10 ft
CENTER (CNTR) DIST : 3.0 m or 10 ft
SURR DIST : 2.7 m or 9 ft
S BACK (SBACK) DIST : 2.4 m or 8 ft
EN21-26.RX-8020V[UJ]_f 02.5.22, 9:47 AM23
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC RX-8020VBK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC RX-8020VBK in the language / languages: English as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info