546765
24
Zoom out
Zoom in
Previous page
1/64
Next page
21
Basic Settings
Some of the following settings are required after connecting and positioning your speakers while others will make
operations easier.
When performing the basic settings, it is recommended to use the remote control so that you can show the
on-screen display on the TV.
When using the buttons on the front panel, you can perform the same settings. (The following on-screen display
cannot be shown if you use the buttons on the front panel.)
The on-screen display will disappear if no operation is done for about 1 minute.
Basic Procedure
Ex. When setting the subwoofer information
On the front panel:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1. Press SETTING repeatedly until
“SUB WOOFER” appears on the
display.
Each time you press the button, the setting items
change as follows.
For details about each setting item (1 to 9), see pages 22 to
26.
2. Press CONTROL UP 5 or
DOWN to select a setting you
want to use.
In this example, the subwoofer information is
set to “YES” to output bass sound through the
subwoofer.
Using the on-screen display (through the remote control):
1. Press MENU.
The MENU screen appears on
the TV.
2. Press 5 or to move to SETTING, then
press 2 or 3.
SETTING 1 menu showing setting items appears on the TV.
The item pointed by
is also shown on the display on the
unit.
3.
Press 5 or to move to
SUBWOOFER.
To go to the next screen, press continuously.
To go back to the previous screen, press 5 continuously.
For details about each setting item (1 to 9), see pages 22 to 26.
4. Press 2 or 3 to select
a setting you want to
use.
In this example, the
subwoofer information is set
to YES to output bass
sound through the
subwoofer.
5. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
On-screen operating
buttons
MENU
PLAY
STOP
/REW
DOWN – TUNING – UP
FF/
EXIT
PAUSE
SET
CONTROL
SETTING
ANALOG
VOLUME
L R
SPEAKERS
1
FRONT SPK:LARGE (1)
SUB WOOFER:NO (1)
SURR SPK:SMALL (1)
CNTR SPK:SMALL (1)
SBACK OUT:2SPK (1)
SBACK SPK:SMALL (1)
EX/ES:AUTO (2)
SURR CH:SURR (1)
FRONT DIST:3.0m (3)
DIST UNIT:meter (3)
SURR DIST:3.0m (3)
CNTR DIST:3.0m (3)
CROSS OVER:100Hz (4)
SBACK DIST:3.0m (3)
MID NIGHT:OFF (5)
LFE ATT:0dB (4)
2:CD 3:TV 4:CDR (6)
DGTL COAX 1:DVD (6)
VIDEO DBS:S/C (7)
VIDEO DVD:S/C (7)
FL DISP:TEXT (9)
ONE TOUCH:OFF (8)
(Back to the beginning)
CONTROL
DOWN UP
ANALOG
VOLUME
L
SUBWFR
R
SPEAKERS
1
NOTICE
Items shown on the on-screen display and on the front
panel display in this section are initial values when shipped
from the factory.
Some of the items cannot be shown or cannot be adjusted
according to currently selected settings. (For details, see
the respective explanation.)
SETTING 2 menu
1
2
SETTING 1 menu
6
7
8
9
SETTING 3 menu
3
4
5
EN21-26.RX-8020V[UJ]_f 02.5.22, 9:47 AM21
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC RX-8020VBK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC RX-8020VBK in the language / languages: English as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info