658632
24
Zoom out
Zoom in
Previous page
1/32
Next page
—24—
Editing with Another VCR
You can use your VCR as the playback or recording VCR. Refer
also to the other components’ instruction manuals for connection
and its operations.
A
Make connections
Example 1: When another VCR is VHS VCR
Connect two VCRs with the supplied audio/video cable.
If another VCR is monaural, connect this VCR’s AUDIO L IN (or
OUT) connector to the audio output (or input) connector on
another VCR.
Example 2: When another VCR is S-VHS VCR and when using
this VCR as the playback VCR
Example 3: When another VCR is S-VHS VCR and when using
this VCR as the recording VCR
B
Load cassettes
Insert the playback cassette into the playback VCR and the
cassette to be recorded on into the recording VCR.
C
Select input location on recording VCR
Select the correct external input location on the recording VCR.
On this VCR (when using this VCR as the recording VCR);
Select “L-1” —when connecting the other VCR to the audio/video
(or S-video) input connectors on the rear panel.
Select “F-1” —when connecting the other VCR to the audio/video
(or S-video) input connectors on the front panel.
On the VCR
Press CH+/– or push the ADVANCED JOG dial, then turn it to the
left or right until “L-1” or “F-1” appears on the display panel.
On the Remote
Press AUX and/or CH+/– until “L-1” or “F-1” appears on the
display panel.
D
Select video input connector on recording VCR
When using this VCR as the recording VCR, select the appropriate
mode depending on the connector being used (
pg. 21).
When using S-VIDEO input connector on the front panel, set
“FRONT AUX INPUT” to “S-VIDEO”.
When using S-VIDEO IN connector on the rear panel, set “REAR
AUX INPUT” to “S-VIDEO”.
When using VIDEO input connector on the front panel, set
“FRONT AUX INPUT” to “VIDEO”.
When using VIDEO IN connector on the rear panel, set “REAR
AUX INPUT” to “VIDEO”.
E
Select edit mode
Set the edit mode to “ON” for the VCRs if such a mode is
equipped.
On this VCR, set “PICTURE CONTROL” to “EDIT” (
pg. 20).
F
Start playback
Press PLAY (
4
) on the playback VCR.
G
Start recording
Press REC (
7
) on the recording VCR.
NOTE:
Be sure to select “AUTO” for “PICTURE CONTROL” (or “NORM”
when “VIDEO CALIBRATION” is set to “OFF”) after you finish
dubbing the tapes. (
pg. 20)
To audio/video input
This VCR
Another VCR
To AUDIO/VIDEO IN
To AUDIO/VIDEO OUT
To audio/video output
When using this VCR
as the recording VCR,
connect this VCR’s
AUDIO/VIDEO IN
connectors to the
audio/video output
connectors on another
VCR.
When using this VCR
as the playback VCR,
connect this VCR’s
AUDIO/VIDEO OUT
connectors to the
audio/video input
connectors on another
VCR.
To S-video input
This VCR (for playback)
Another VCR (for recording)
S-video cable
(supplied)
To AUDIO OUT
To S-VIDEO OUT
Audio cable
(not supplied)
To audio input
To S-video output
This VCR (for recording)
Another VCR (for playback)
S-video cable
(supplied)
To AUDIO input
To S-VIDEO input
Audio cable
(not supplied)
To audio output
HR-S9911U-EN.fm Page 24 Monday, April 22, 2002 1:34 PM
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S9911U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S9911U in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info