658632
22
Zoom out
Zoom in
Previous page
1/32
Next page
—22—
Multi-Brand Remote Control
When programed (set) with a manufacturer’s (brand’s) code, this
Remote can perform some of the remote control functions of the
listed TVs, cable boxes and DBS (Direct Broadcast Satellite)
receivers. You can control a JVC TV without setting a brand code.
NOTES:
Some unit’s brands have more than one code listed. If after
setting, the remote does not operate the unit, try one of the other
listed codes.
Depending on the type of unit, some or all functions cannot be
operated using this Remote.
It is impossible to control a unit that does not have a remote
sensor.
It is not possible to set the Remote for both your cable box and a
DBS receiver at the same time.
Once you have set the Remote to operate a unit, you do not
have to set it again until you replace the Remote’s batteries.
If the batteries of the Remote are discharged, the Remote will
not be able to control the TV, cable box or DBS receiver.
Replace the batteries.
TV Brand Setting
A
Turn on TV
Turn on the TV using the Power button on the TV or its Remote.
B Set TV brand code
A Press and hold POWER on the Remote.
B Press the Number keys to enter your TV’s brand code.
C Press STOP (8), and release POWER. The TV should turn off.
C Operate TV
First set the VCR/TV/CABLE/DBS selector to “TV”, then press one
of the following buttons: POWER, TV/VCR, TV CH+/–,
^ (TV
Muting), TV VOL+/–, and the Number keys.
For some brands, you must press ENTER after having pressed the
Number keys to enter a channel number.
To operate the VCR, set the VCR/TV/CABLE/DBS selector back
to “VCR”.
Cable Box or DBS Receiver Brand Setting
A Turn on cable box or DBS receiver
Turn on the cable box or DBS receiver using the Power button on
the unit or its Remote.
B Enter brand code
A Press and hold POWER on the Remote.
B Press the Number keys to enter your cable box’s (or DBS
receiver’s) brand code.
C Press STOP (8), and release POWER. The cable box (or DBS
receiver) should turn off.
C Operate cable box or DBS receiver
First set the VCR/TV/CABLE/DBS selector to “CABLE/DBS”, then
press one of the following buttons: POWER, TV CH+/–, and the
Number keys.
For some brands, you must press ENTER after having pressed the
Number keys to enter a channel number.
To change the cable box’s (or DBS receiver’s) channels, press TV
CH+/– or the Number keys. (The CH+/– button can be used to
change the VCR’s channels only.)
To operate the VCR, set the VCR/TV/CABLE/DBS selector back
to “VCR”.
Changing Remote Control Code
This Remote is capable of transmitting two different control codes,
A code control signals or B code control signals. This Remote is
preset to send A code signals because your VCR is initially set to
respond to A code signals. You can easily change your Remote
and VCR to send and respond to B code signals. When using two
JVC VCRs, set the two VCRs and their Remotes to different codes,
so that the Remotes can operate the VCRs separately.
A Set remote control code for Remote
A Press and hold A/B.
B Press the Number key2”.
C Press STOP (8), and release A/B.
The Remote now can transmit B code control signals.
B Check remote control code for VCR
Press and hold 4 on the VCR for more than 5 seconds while the
VCR is turned off. The code currently set appears on the display
panel.
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
Set the VCR/TV/CABLE/DBS selector on the Remote to “TV”.
TV BRAND CODE TV BRAND CODE
JVC
HITACHI
MAGNAVOX
MITSUBISHI
PANASONIC
RCA
SHARP
01, 03
10
02
03
04, 11
05
06
SONY
SAMSUNG
SANYO
SEARS
TOSHIBA
ZENITH
07
12
13
13
08
09
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
Set the VCR/TV/CABLE/DBS selector on the Remote to
“CABLE/DBS”.
CABLE BOX BRAND CODE
ARCHER
CABLETENNA
CABLEVIEW
CITIZEN
CURTIS
DIAMOND
GC BRAND
GEMINI
GENERAL INSTRUMENTS
HAMLIN
JASCO
JERROLD
NOVAVISION
OAK
PANASONIC
PULSER
RCA
REGAL
REMBRANDT
SAMSUNG
SCIENTIFIC ATLANTA
SIGMA
SL MARX
SPRUCER
STARGATE
TELEVIEW
TOCOM
UNIKA
UNIVERSAL
VIDEOWAY
ZENITH
01, 05, 17
01, 17
15, 16, 17, 21, 25
15, 16, 17, 21, 25
02
01, 17
15, 16, 17, 21, 25
15
01, 04, 06, 11, 12, 15, 28
10, 18, 23
15
01, 04, 06, 11, 12, 15, 28
02
07
13, 14
15, 16, 17, 21, 25
13, 14
10, 18, 23
01, 16, 17
05, 16, 24
02
07
05, 16, 17, 24, 25
13, 14
05, 15, 16, 17, 21, 24, 25
05, 16, 24
01, 04, 16
01, 17
16, 17, 25
03, 09, 22
03, 09, 22
DBS RECEIVER BRAND CODE
JVC (DISH Network)
ECHOSTAR (DISH Network)
SONY (DSS)
RCA (DSS)
51
51
41
40
Set the VCR/TV/CABLE/DBS selector on the Remote to “VCR”.
HR-S9911U-EN.fm Page 22 Friday, April 26, 2002 11:37 AM
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S9911U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S9911U in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info