658631
59
Zoom out
Zoom in
Previous page
1/88
Next page
EN 59
* The default setting is bold in the table below.
This VCR can record two sound tracks simultaneously (normal and Hi-
Fi) on a tape.
You can select the sound track(s) to listen to while playing back a Hi-Fi
stereo tape.
In addition, when playing back a prerecorded tape containing two
separate audio programs on the Hi-Fi tracks, you can choose either one
by selecting either HI-FI L or HI-FI R.
NOTES:
While playing back a monaural tape, sounds on the normal track will be heard
regardless of this setting.
If RF connection (
pg. 7) is used for viewing pictures on the TV, sound will be
monaural even though you select HI-FI.
You can also use the
A. MONITOR
button on the Remote to select the desired
monitor sound. (
pg. 25)
You can determine which recording mode either S-VHS mode or VHS
mode is used for recording on S-VHS tapes.
When this function is set to ON, you can record on S-VHS tapes with
S-VHS picture quality.
When this function is set to OFF, you can record on S-VHS tapes with
VHS picture quality.
NOTES:
S-VHS mode allows you to make high quality video recordings with horizontal
resolution of 400 lines, comparing with the 230 lines of resolution of
conventional VHS recordings. To achieve the highest quality picture we
recommend to record in S-VHS mode. (But remember that a conventional VHS
VCR without SQPB cannot play back S-VHS tapes recorded in S-VHS mode.)
S-VHS MODE setting does not affect recording on VHS tapes. Recording on
VHS tapes is always performed in VHS mode except when using S-VHS ET
mode (
pg. 31).
The REMOTE PAUSE/AV COMPULINK terminal on the rear panel can be used
as either the REMOTE PAUSE terminal or the AV COMPULINK terminal.
When this function is set to ON, you can use this terminal as the AV
COMPULINK terminal.
By connecting other JVCs AV COMPULINK components (see the
diagram on the next page), including amplifiers (or receivers) and
televisions, one touch control of the audio and video components linked
via their AV COMPULINK connectors becomes possible.
For example: simply load a cassette in the VCR and press PLAY ( 3 ) so that
the AV COMPULINK components automatically turn on, the TVs AV mode is
selected and the VCR starts playback. (You do not have to press PLAY ( 3 ) if
the cassettes record safety tab is removed.)
When this function is set to OFF, you can use this terminal as the
REMOTE PAUSE terminal. ( pg. 65)
NOTE:
Connection varies depending on the type of JVC TV you have. Refer to the TVs
instruction manual when making this connection.
CONTINUED ON NEXT PAGE \
AUDIO MONITOR
HI-FI: Normally select this.
Hi-Fi sound is played
back.
HI-FI L: Sound on the left Hi-Fi
channel is played back.
HI-FI R: Sound on the right Hi-Fi
channel is played back.
NORM: Sound on the normal track
is played back.
MIX: Both sounds on the Hi-Fi
track and normal track are
mixed and played back.
S-VHS MODE
ON
OFF
AV COMPU-LINK
ON
OFF
Refer to page 56 for setting procedures.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S9900U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S9900U in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info