658631
57
Zoom out
Zoom in
Previous page
1/88
Next page
EN 57
* The default setting is bold in the table below.
When this function is set to ON, this VCR checks the condition of the
tape in use during playback and recording, and compensates to provide
the highest-possible pictures. This takes place whenever you play back a
tape or start recording after inserting a tape.
NOTES:
During playback, this function is always working even though VIDEO
CALIBRATION appears just at the beginning of automatic tracking.
During recording, this function works only for the first EP recording and the first
SP recording on an inserted tape.
For timer recording, this function checks the tape condition both for the SP
recording and the EP recording before the first timer recording starts.
When you play back rental tapes or tapes recorded on other VCRs, set this
function either ON or OFF whichever gives you the best picture.
This function helps you to adjust the playback picture quality according
to your preference.
NOTES:
When you select EDIT, SOFT or SHARP, the selected mode will not
change until you select again.
Select EDIT when you are editing tapes (
pg. 65, 66, and 69). After you
finish editing the tapes, select AUTO (NORM when VIDEO
CALIBRATION is OFF.)
When this function is set to “ON”:
The timer recording standby mode is automatically engaged when the
VCR is turned off. It is temporarily canceled when the VCR is turned
on. You do not have to press TIMER to engage or disengage the timer
recording standby mode.
When this function is set to “OFF”:
You have to press TIMER to engage or disengage the timer recording
standby mode.
When this function is set to ON, various VCR status information (on-
screen display) appears on the screen.
NOTES:
When you use this VCR as the playback VCR for editing a tape, be sure to set
this function to OFF; otherwise, the VCR status information (on-screen
display) will be recorded on the edited tape.
If you select a channel on which no signal is received, the channel number is
displayed regardless of this function setting.
PICTURE CONTROL
AUTO (NORM):
Normally select
this. Picture quality is
adjusted automatically.
When VIDEO
CALIBRATION is OFF,
NORM will appear instead
of AUTO.
EDIT: Minimizes picture
degradation during editing
(recording and playback).
SOFT: Reduces image
coarseness when viewing
overplayed tapes
containing much noise.
SHARP: Clearer, sharper-edged
picture when viewing
images with much flat,
same-colored surfaces
such as cartoons.
VIDEO CALIBRATION
ON
OFF
AUTO TIMER
ON
OFF
SUPERIMPOSE
ON
OFF
Refer to page 56 for setting procedures.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S9900U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S9900U in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info