658620
13
Zoom out
Zoom in
Previous page
1/24
Next page
13
Page 13 October 31, 2002 9:59 am
Express Timer Programing
Load a cassette with the record safety tab intact. The VCR turns
on, and the counter is reset, automatically.
A
Press PROG. on the Remote to access the PlusCode No. screen.
B
Press START+/ once to access
Program screen.
Press START+/, STOP+/, DATE+/ or
CH+/ repeatedly to enter the start
time, stop time, date or channel.
Press and hold START+/ or STOP+/
to increase the time in 30-minute
intervals.
To set the tape speed, press SP/EP.
To timer-record daily (MondayFriday) or weekly serials,
press DAILY (M-F) (Number key 8) or WEEKLY (Number
key 9). Pressing the button again makes the DAILY or
WEEKLY display disappear.
If you are using a DBS receiver and
DBS RECEIVER SET is set to ON,
the band indication appears under
the channel number indication.
(Refer to Cable Box and/or DBS
Receiver Control Setting (
pg. 7).)
TV: To timer-record a regular TV
broadcast received on the VCR.
CATV: To timer-record a cable TV broadcast received on the
VCR, or through a cable box (unless CABLE BOX
SET is set to OFF).
DBS: To timer-record a satellite broadcast received through
a DBS receiver.
If the channel number entered requires that the band be set
and 7=DBS is displayed on the screen, press DBS (Number
key 7) to select DBS.
C
Press OK or PROG..
If PROGRAM NOT COMPLETED PROGRAM OVERLAP
appears, see Program overlap warning display (
pg. 14).
D
Press TIMER. The VCR turns off automatically and
#
is
displayed on the display panel.
24HR Quick Programing
You can program a timer recording that starts within 24 hours
using the JOG dial on the VCR.
Load a cassette with the record safety tab intact. The VCR turns
on, and the counter is reset, automatically.
A
Press 24HR QUICK PROGRAM on the VCR.
$
starts blinking on the display panel.
B
Turn the JOG dial to the left or right to set
the start time.
One click stop of the JOG dial changes
the time in 5-minute intervals.
C
Push the JOG dial.
starts blinking on
the display panel. Turn the JOG dial to the
left or right to set the stop time.
To set the tape speed, press SP/EP. The
current setting for the tape speed appears
on the display panel for about 5 seconds.
Press SP/EP again to change the setting
while tape speed is displayed.
D
Push the JOG dial. Turn the JOG dial to the
left or right to select the channel, then press 24HR QUICK
PROGRAM. The VCR turns off automatically and
#
is
displayed on the display panel.
NOTES:
If Err appears on the display panel, repeat the above steps
again.
When a menu screen is shown, you cannot use 24HR Quick
Programing function. Press MENU to return to normal screen,
and try again.
You can use 24HR Quick Programing function also when the
VCR is turned off.
For 24HR Quick Programing function, the program overlap
warning display does not appear even if some programs overlap
each other.
To use the VCR while it is in timer recording standby
mode
Press TIMER, then press POWER 1. After you use the VCR, press
TIMER again to put the VCR into timer recording standby mode.
Checking, canceling or changing program settings
A
Disengage timer
Press TIMER, then press POWER 1.
When AUTO TIMER is set to ON (
pg. 15), you do not
have to press TIMER.
B
Access Program Check screen
Press PROG. CHECK.
C
Access Program screen
Press PROG. CHECK again. Each time you
press PROG. CHECK, the next programs
Program screen appears.
D
Cancel or change program setting
To cancel a program, press CANCEL when the Program screen
you do not want is shown.
To change a program, press the appropriate button: START+/,
STOP+/, DATE+/, CH+/, DAILY (M-F) (Number key 8),
WEEKLY (Number key 9), and/or SP/EP when the Program
screen on which you want to make changes is shown.
E
Return to normal screen
Press PROG. CHECK repeatedly until no Program screen is
shown.
F
Reengage timer recording standby mode
Press TIMER. The VCR turns off automatically and
#
is
displayed on the display panel.
When AUTO TIMER is set to ON (
pg. 15), the timer
recording standby mode automatically resumes when you turn
off the VCR.
PROGRAM 1
START STOP
: AM : AM
DATE CH
/ / –– SP
PRESS (+/, SP/EP, 8=DAILY
9=WEEKLY), THEN (0K)
PRESS (PROG.) TO END
PROGRAM 1
START STOP
8:00AM 9:00AM
DATE CH
12/24/03 110 SP
WED DBS
PRESS (+/, SP/EP, 8=DAILY
9=WEEKLY, 7=DBS), THEN (0K)
PRESS (PROG.) TO END
Start time
Stop time
Channel number
PRESS (CHECK) TO NEXT
PR START STOP CH DATE
1 8:00P 10:00 12 12/24
2 10:00A 10:45 40 12/25
3 11:30P 1:00 125 12/25
4
5
6
7
8
CONTINUED ON NEXT PAGE
HR-S5902U-EN.fm Page 13 Thursday, October 31, 2002 10:00 AM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S5902 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S5902 in the language / languages: English as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info