658620
11
Zoom out
Zoom in
Previous page
1/24
Next page
11
Page 11 November 5, 2002 6:11 pm
It may be unlawful to record or play back copyrighted material
without the consent of the copyright owner.
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette, remove its record
safety tab. To record on it later, cover
the hole with adhesive tape.
Basic Recording
A
Load a cassette
Make sure the record safety tab is intact. If not, cover the hole with
adhesive tape before inserting the cassette.
The VCR turns on, and the counter on the on-screen display is
reset, automatically.
B
Select recording channel
Press CH+/– or the Number keys on the Remote. Or push the JOG
dial, then turn it to the left or right.
If you connect the TV and the VCR only using the RF
connection (
pg. 5), press TV/VCR on the Remote so that the
VCR mode indicator lights on the display panel, to view the
program to be recorded.
C
Set tape speed
Press SP/EP. The selected tape speed will appear on the TV screen.
NOTE:
You can select tape speed in the stop mode or during recording
pause mode.
D
Start recording
On the VCR, press REC (
7
). Or on the Remote, while holding REC
(
7
), press PLAY (
4
).
NOTE:
If VIDEO CALIBRATION is set to ON (
pg. 15) (default
setting), the VCR takes about 7 seconds to assess the quality of the
tape in use, then recording begins with the picture level
optimized.
NOTE:
If the tape reaches its end during recording, the recording stops
and
and
$ on the display panel blink. Press STOP/EJECT
(0) on the VCR to eject the cassette or press REW (3) on the
Remote to rewind the tape.
Recording Features
Specifying recording length
Instant Timer Recording (ITR)
During recording, press REC (7) on the VCR repeatedly until the
recording length you want appears on the display panel. The
record indicator (
) on the display panel starts blinking.
Each time you press the button, recording length increases in
30-minute intervals (up to 6 hours).
The VCR shuts off after recording is finished.
To cancel an ITR, press STOP (
8) on the Remote or STOP/EJECT
(
0) on the VCR.
Watching one program while recording another
During recording...
If you connect the TV and the VCR only using the RF
connection (
pg. 5) to view pictures from the VCR, press TV/
VCR on the Remote so that VCR mode indicator goes off from
the display panel. (The TV broadcast being recorded
disappears.)
If you are using the AV connection (
pg. 5) to view pictures
from the VCR, change the TVs input mode from AV to TV.
Then, select the channel you want to watch, on the TV.
Second Audio Recording
This VCRs built-in MTS decoder enables reception of
Multichannel TV Sound broadcast. To record a SAP program
received, set 2ND AUDIO RECORD to ON (
pg. 15).
S-VHS (Super VHS), S-VHS ET or VHS Recording
Mode
This VCR can record in S-VHS (Super VHS), S-VHS ET or VHS.
To record in S-VHS:
Set S-VHS MODE to ON (
pg. 16). Then, insert a cassette
marked S-VHS. The S-VHS indicator lights up on the display
panel.
The S-VHS recording mode is selected.
To record in S-VHS ET on a VHS cassette:
Set S-VHS ET to ON (
pg. 15). Then, insert a cassette
marked VHS. The S-VHS indicator lights up on the display
panel.
To record in VHS:
Insert a cassette marked VHS”.
Set S-VHS ET to OFF (
pg. 15).
To record in VHS on an S-VHS cassette:
Insert a cassette marked S-VHS. The S-VHS indicator lights up
on the display panel. Then, set S-VHS MODE to OFF
(
pg. 16). The S-VHS indicator goes off.
The VHS recording mode is selected.
NOTE:
When playing back a tape that has been recorded in S-VHS or
S-VHS ET, the S-VHS indicator lights up on the display panel
regardless of the S-VHS ET (
pg. 15) or S-VHS MODE
(
pg. 16) setting.
Recording
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
During recording
Pause recording
Press PAUSE (
9
).
Press PLAY (
4
) to resume recording.
You can select channel in the recording pause mode.
Stop recording
Press STOP (
8
) on the
Remote.
OR
Press STOP/EJECT (
0
) on
the VCR.
Record safety tab
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
HR-S5902U-EN.fm Page 11 Tuesday, November 5, 2002 6:17 PM
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S5902 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S5902 in the language / languages: English as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info