136123
8
Zoom out
Zoom in
Previous page
1/84
Next page
8
123
456
789
1
2
1
2
3
0
3
4
4
QUICK SET UP GUIDE (cont.)
STEP
3
AUTO SET UP
SET THE TUNER CHANNELS, CLOCK AND GUIDE PROGRAM NUMBERS
The Auto Set Up function sets the tuner channels, clock and VIDEO Plus+ assigned Guide Program numbers automatically the first
time the button on the recorder or on the remote is pressed to turn on the recorder after the mains power cord has been plugged
into a mains outlet.
Before performing the following procedure, make sure that:
the TV aerial cable is connected to the recorder.
the mains power cord is plugged into the mains outlet.
batteries have been installed in the remote control.
1
ATTENTION
Once you have performed Auto Set Up, all the stored
stations and Guide Program numbers remain in the
recorder's memory and the recorder will not perform Auto
Set Up again. If there is a power cut and the recorder's
memory backup expires you only need to reset the clock.
( pg. 72)
If you have moved to a different area, perform each setting
as required.
Tuner setting pg. 64
Clock setting pg. 72
If a new station begins broadcasting in your area, perform
tuner setting ( pg. 64).
NOTES:
Auto channel set function takes place first; it assigns
automatically all receivable stations in your area.
Auto clock set function sets the clock automatically.
During auto channel set, the recorder recognizes each
station name of the detected stations and stores them in
the recorder's memory, then automatically sets the VIDEO
Plus+ system assigned Guide Program numbers for those
stations according to the broadcast area.
If there is a power cut or if you press or MENU while
Auto Set Up is in progress, Auto Set Up will be inter-
rupted; be sure to turn off the recorder power once and
press to turn the power back on in order to re-start
Auto Set Up.
Press to turn on the recorder.
If "Auto" appears on the display panel,
press OK or
#
. "Auto" blinks; do NOT
press any button on the recorder or
remote control until the display panel shows either the display as illustrated on
page 10 or "– – :– –". Auto Set Up usually takes about 4 – 12 minutes; the
duration varies by area.
If "– –:– –" appears on the display panel,
refer to page 10.
If the TV is turned on and set to its AV mode,
the AUTO SET screen will appear.
When you have connected the video recorder
to a TV offering T-V Link via the AV connec-
tion ( pg. 6) and the TV is turned on, the
recorder automatically performs the Preset
Download ( pg. 9) even if you select
"Auto" for Auto Set Up function.
0
+++
Beginning End
AUTO SET
PLEASE WAIT
[MENU] : EXIT
Refer to page 10 to check the results.
3
2
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC hr dvs 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC hr dvs 2 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info