595826
52
Zoom out
Zoom in
Previous page
1/91
Next page
52 EN
MasterPage: Heading0_Left
REFERENCES
Power
No power is supplied.
The power is not connected properly.
H Connect the AC adapter securely. ( pg. 14)
The battery pack is not attached firmly.
H Detach the battery pack once again and re-attach
it firmly. ( pg. 14)
The battery is dead.
H Replace the dead battery with a fully charged
one. ( pg. 14)
Recording
Recording cannot be performed.
[MEMORY CARD IS FULL] appears.
H Replace with new recording medium or delete
unnecessary files. ( pg. 17, 18, 40)
Recording medium is not selected properly.
H Select the recording medium. ( pg. 19, 48, 49)
The battery/CF card cover is open.
H
Close the cover.
When shooting a subject illuminated by
bright light, vertical lines appear.
This is not a malfunction.
When the screen is under direct sunlight
during shooting, the screen becomes red or
black for an instant.
This is not a malfunction.
During recording, the date/time does not
appear.
[DATE/TIME] is set to [OFF].
H Set [DATE/TIME] to [ON]. ( pg. 49)
The LCD monitor indications blink.
Certain modes of program AE, effect, DIS and
other functions that cannot be used together are
selected at the same time.
Digital zoom does not work.
[ZOOM] is set to [10X] (optical zoom).
H Set [ZOOM] to [40X] or [200X]. ( pg. 50)
Digital zoom is not available in the still image
recording mode.
Playback
Playback cannot be performed.
Recording medium is not selected properly.
H Select the recording medium. ( pg. 19, 48, 49)
The battery/CF card cover is open.
H
Close the cover.
Playback starts, but there is no picture on the
connected TV.
H Set the TV's input mode or channel appropriate
for video playback.
The same image is displayed for a long time
during video playback, or motion is choppy.
There are periods of silence during voice
playback.
If the surface of the removable hard disk is
damaged, it makes difficult to read data and these
phenomena will appear. This camera will make all
possible efforts to read data, but when such a
state continues for some time, and further
playback is impossible, it will stop automatically.
Troubleshooting
The camera is a microcomputer-controlled
device. External noise and interference (from a
TV, a radio, etc.) might prevent it from
functioning properly.
H To solve the problem, follow the Instructions
below at first.
H If the problem is not solved, reset the
camera. (Refer to “To reset the camera”
below.)
H If the problem still exists, please consult your
nearest JVC dealer.
8 To reset the camera
A Press the reset hole using a piece of wire or
other such pointed instrument. The power is
turned off once and turned on again
automatically.
B If nothing happens, set the power switch to
OFF and remove the power supply (battery
pack or AC adapter) from the camera, then
put it back again.
Reset Hole
GZ-MC500US.book Page 52 Wednesday, April 13, 2005 7:08 PM
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GZ-MC500U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GZ-MC500U in the language / languages: English as an attachment in your email.

The manual is 12,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info