34423
40
Zoom out
Zoom in
Previous page
1/96
Next page
40
5. PREPARATIONS
LOG REW FF
PLAY STILL
STOP
EJECT
POWER
NG
GAIN
OUTPUT
WHT.BAL
VTR
ON OFF
SAVE STBY
H M L
BARS CAM
AUTO KNEE
PRST A B
ON
OFF
Cassette cover
Videocassette
Cassette rear switch
VTR switch POWER switch
EJECT switch
• A cassette cannot be loaded or unloaded while the GY-DV500 is in POWER OFF mode.
Use a videocassette tape marked MiniDV.
The videocassette should be held vertical and inserted straight into the slot.
Loading the Cassette
* Recording can be started by pressing the VTR trigger button
from the record-pause condition. For details on how to record,
see page 50.
After the cassette cover is closed, it takes about 8 seconds
before the unit can start recording or before it enters the
stop mode.
The GY-DV500 cannot be operated while the cassette cover
is open. Make sure to close the cover before operating the
unit.
Unloading the Cassette
5-2 Cassette Loading and Unloading
1.
Set the POWER switch to ON.
2.
Slide the EJECT switch to the side to open the cassette
cover.
3.
Insert a videocassette into the cassette slot after removing
the tape slack.
Ensure that the videocassette is fully inserted.
4.
Slowly close the cassette cover by pushing it in all the way.
When the cassette cover is closed, the OPERATE LED lights
up green and the unit is in the condition where it can be
operated. In the SAVE mode, the OPERATE LED lights
orange.
The condition at the completion of loading varies depending
on the position of the VTR switch and the switch on the back
of the videocassette as shown below.
1.
Set the POWER switch to ON.
2.
Slide the EJECT switch all the way to the side to start tape
ejection.
The cassette indicator on the display blinks
during tape ejection and turns off after the
ejection has been completed.
• It takes a few seconds before the cassette is ejected after
the EJECT switch is moved.
3.
Take out the videocassette.
4.
Close the cassette cover.
Do not leave the unit for a long period with the cassette
cover open as dirt or other foreign objects may enter the
VCR section and cause malfunction.
CAUTION:
CAUTION:
The cassette indicator on the display blinks
during tape loading and lights steadily after
the loading has been completed.
VTR switch
Switch on Back of Videocassette
REC
SAVE
Enters record-
pause mode after
back-spacing.
The unit enters
stop mode.
“REC INH” is
displayed for a few
seconds on the
counter display.
STBY
In the record-pause
mode and the drum
rotation is stopped.
SAVE
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GY-DV500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GY-DV500 in the language / languages: English as an attachment in your email.

The manual is 4,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info