27273
17
Zoom out
Zoom in
Previous page
1/80
Next page
EN17
P
L
A
Y
O
F
F
RECORDING
Basic Recording For Digital Still Camera (D.S.C.)
Basic Shooting (Snapshot)
You can use your camcorder as a Digital Still Camera for
taking snapshots.
NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
Power (
pg. 6)
Grip Adjustment (
pg. 8)
Viewfinder Adjustment (
pg. 8)
Loading A MultiMediaCard (
pg. 11)
Picture Quality Mode Setting (
pg. 12)
SNAPSHOT MODE SELECTION
1
Set the VIDEO/DSC Switch to , then set the
Power Switch to or while pressing down
the Lock Button located on the switch.
2
Choose the appropriate Snapshot mode from the 5
available by repeatedly pressing MODE until the
desired snapshot mode indicator appears.
The available Snapshot modes are the same as
those on pg. 16.
SNAPSHOT RECORDING
1
Press SNAPSHOT.
The image is stored in the MultiMediaCard.
To Delete Unwanted Still Images . . .
.... when unwanted still images are stored in the
MultiMediaCard or its memory is full, refer to
Deleting Images ( pg. 38) and delete unwanted
still images.
NOTES:
Even if MULTI-4 or MULTI-9 is engaged, Snapshot
recording will be performed in the FULL mode during
Digital Zoom.
Even if DIS is set to ON (
pg. 24), the Stabiliser
will be disabled.
If Snapshot recording is not possible, PHOTO blinks
when SNAPSHOT is pressed.
The Motor Drive mode (
pg. 16) is disabled when the
VIDEO/DSC Switch is set to .
If Programme AE with special effects (
pg. 28) is
engaged, certain modes of Programme AE with special
effects are disabled during Snapshot recording. In such a
case, the icon blinks.
If shooting is not performed for approx. 5 minutes when
the Power Switch is set to or and power is
supplied from the battery pack, the camcorder shuts off
automatically to save power. To perform shooting again,
set the Power Switch to OFF, then to or .
Still images taken are compliant to DCF (Design rules for
Camera File systems). They do not have any
compatibility with devices which are not compliant to
DCF.
Power Switch
SNAPSHOT Button
Lock Button
VIDEO/DSC Switch (Open the
LCD monitor to access this switch.)
MODE
Button
STD
10/50
Number of shots taken
Displays the number of images that
have already been shot.
Total number of shots
Displays the approximate total number of shots that
can be stored, including those already taken. The
number increases or decreases depending on the shots
stored, the Picture Quality mode, etc.
Picture Quality mode
Displays the Picture Quality mode of the stored
image. There are 2 modes available:
FINE and STD (Standard) (
pg. 12).
Display
Shooting icon
Appears and blinks during shooting.
Card icon
Appears during shooting and blinks when a
MultiMediaCard is not loaded.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GRDVL308 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GRDVL308 in the language / languages: English as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info