27273
16
Zoom out
Zoom in
Previous page
1/80
Next page
16 EN
P
L
A
Y
O
F
F
FULL
MULTI-9
Multi-Analyser 9
FRAME
Snapshot mode with
frame*
FULL
Snapshot mode with no
frame*
MULTI-4
Multi-Analyser 4
* There is the sound effect of a shutter closing.
RECORDING
Basic Recording For Video (cont.)
Snapshot (For Video Recording)
This feature lets you record still images that look like
photographs onto a tape.
SNAPSHOT MODE SELECTION
1
Set the VIDEO/DSC Switch to VIDEO, then set the
Power Switch to or while pressing down
the Lock Button located on the switch.
2
Choose the appropriate Snapshot mode from the 5
available by repeatedly pressing MODE until the
desired snapshot mode indicator appears.
SNAPSHOT RECORDING
1
Press SNAPSHOT.
If you press during Record-Standby . . .
.... PHOTO appears and a still image will be
recorded for approx. 6 seconds, then the
camcorder re-enters the Record-Standby mode.
If you press during Recording . . .
.... PHOTO appears and a still image will be
recorded for approx. 6 seconds, then the normal
recording resumes.
Motor Drive Mode
Keeping SNAPSHOT pressed provides an effect similar to
serial photography. (Interval between still images: approx.
1 second)
NOTES:
Even if MULTI-4 or MULTI-9 is engaged, Snapshot
recording will be performed in the FULL mode during
Digital Zoom.
If Snapshot recording is not possible, PHOTO blinks
when SNAPSHOT is pressed.
If Programme AE with special effects (
pg. 28) is
engaged, certain modes of Programme AE with special
effects are disabled during Snapshot recording. In such a
case, the icon blinks.
If SNAPSHOT is pressed when DIS is set to ON
(
pg. 24), the Stabiliser will be disabled.
When REC SELECT is set to / in the
Menu Screen (
pg. 25), still images are recorded not
only onto the tape but also in the MultiMediaCard. If
SNAPSHOT is pressed when a tape is not loaded, still
images will not be recorded in the MultiMediaCard.
To dub images recorded on a tape to the
MultiMediaCard,
pg. 47.
During tape playback as well, all snapshot modes are
available when COPY is set to OFF in the
Menu Screen (
pg. 32). However, the shutter sound is
not heard.
During Snapshot recording, the image displayed in the
viewfinder may be partially missing. However, there is
no effect in the recorded image.
When a cable is connected to the AV connector, the
shutter sound is not heard from the speaker, however it
is recorded onto the tape.
will appear while the snapshot is being taken.
Power Switch
SNAPSHOT Button
Lock Button
MODE Button
VIDEO/DSC Switch (Open the
LCD monitor to access this switch.)
PIN-UP
Pin-Up mode*
Snapshot mode
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GRDVL308 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GRDVL308 in the language / languages: English as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info