533229
31
Zoom out
Zoom in
Previous page
1/48
Next page
EN
31
USING THE REMOTE CONTROL UNIT
!
@
9
4
)
r
#
Make sure to set S/AV INPUT to OFF in the Menu
Screen (GR-D31 only,
pg. 24).
Set the video out select switch of the cable adapter as
required:
Y/C : When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not
accept Y/C signals and uses an audio/video
cable.
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
To Remote PAUSE
or R.A.EDIT
TV
To PAUSE IN $
Editing cable***
Audio/Video cable
(provided)
* Connect when an S-Video cable is not used.
** When connecting cables, open this cover.
*** Provided with the optional Remote Control kit
RM-V717KITU.
Connector
cover**
To AV
*
To EDIT (
To
S-VIDEO
)
Programme
Random
Assemble
Editing Menu
1
2
3
4
5
6
7
8
–– : –– ~
~
~
~
~
~
~
~
––
NIOUT
MODE
:
––
0
:
000
TOTAL
CODETIME
VCR
“Y/C”/“CVBS”
video out
select switch
If your VCR has the
SCART connector,
use the provided
cable adapter.
To AUDIO, VIDEO*
and
-IN
connectors
5 If using a Fade/Wipe at the beginning of the scene,
press FADE/WIPE 9 on the remote control.
Cycle through the effects by pressing repeatedly, and
stop when the one you want is displayed.
6 At the beginning of the scene, press EDIT IN/OUT
@ on the remote control. The Edit-In position appears
in the Random Assemble Editing Menu.
7 At the end of the scene, press EDIT IN/OUT @. The
Edit-Out position appears in the Random Assemble
Editing Menu.
8 If using a Fade/Wipe at the end of the scene, press
FADE/WIPE 9.
Cycle through the effects by pressing repeatedly, and
stop when the one you want is displayed.
If you select a Fade/Wipe effect for an Edit-Out point,
the effect is automatically applied to the following
Edit-In point.
When you use Fade/Wipe effects, that time is
included in the total time.
9 If using Playback Special Effects, press EFFECT !
( pg. 28).
10
Repeat steps 6 through 9 to register additional
scenes.
To change previously registered points, press
CANCEL # on the remote control. The registered
points disappear, one at a time, from the most
recently registered point.
If you are not using Fade/Wipe or Programme AE with
special effects, repeat steps 6 and 7 only.
NOTES:
When choosing a scene, set Edit-In and Edit-Out points
so that there is a relatively large difference between
them.
If the search time for an in-point exceeds 5 minutes, the
recording decks Record-Standby mode will be cancelled
and editing will not take place.
If there are blank portions before or after the Edit-In and
Edit-Out points, a blue screen may be included in the
edited version.
Since time codes register time only as accurately as
seconds, the time code total time may not match the total
programme time exactly.
Turning off the camcorders power erases all registered
Edit-In and Edit-Out points.
SELECT SCENES
4 Point the remote control at the camcorders remote
sensor. Press PLAY (
4
) ) and then press R.A.EDIT
ON/OFF r on the remote control.
The Random Assemble Editing Menu appears.
S-Video cable
(optional)
Continued on next page.
GR-D31/21EK 28-33 02.12.19, 9:15 PM31
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-D31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-D31 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info