533229
27
Zoom out
Zoom in
Previous page
1/48
Next page
EN
27
DUBBING
Dubbing To Or From A Video Unit
Equipped With A DV Connector
(Digital Dubbing)
It is also possible to copy recorded scenes from this
camcorder onto another video unit equipped with a DV
connector. Since a digital signal is sent, there is little if
any image or sound deterioration.
To Use This Camcorder As A Player
1 Make sure all units are turned off. Connect this
camcorder to a video unit equipped with a DV input
connector using a DV cable as shown in the illustration.
2 Set this camcorders Power Switch y to PLAY
while pressing down the Lock Button t located on the
switch, turn on the video units power, and insert the
appropriate cassettes in this camcorder and the video
unit.
3 Press
4
6 to play back the source tape.
4 While watching the playback on the monitor, engage
the DV connector-equipped video units record mode
from the spot on the source tape you want to begin
recording.
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack (
pg. 7).
If the remote control is used when both the player and
recorder are JVC video units, both units will perform the
same operation. To prevent this from happening, press
the buttons on both units.
If a blank portion or disturbed image is played back on
the player during dubbing, the dubbing may stop so that
an unusual image is not dubbed.
Even though the DV cable is connected correctly,
sometimes the image may not appear in step 4. If this
occurs, turn off the power and make connections again.
If Playback Zoom (
pg. 13, 28), Playback Special
Effects (
pg. 28) or Snapshot is attempted during
playback, only the original playback image recorded on
the tape is output from the DV connector !.
When using a DV cable, be sure to use the optional
JVC VC-VDV204U DV cable.
OFF
(
CHARGE
)
PLAY
6
w
t
y
DV cable
(optional)
Video unit equipped
with DV connector
To DV
IN/OUT
To DV
!
Core filter
Core filter
5. Press the Recording Start/Stop button w to start
recording. % rotates.
6. Press the Recording Start/Stop button w again to
engage the Record-Pause mode. % stops
rotating.
NOTES:
Digital Dubbing is performed in the sound mode recorded
on the original tape, regardless of the current SOUND
MODE setting ( pg. 21).
During Digital Dubbing, incoming signals cannot be
output through the video or audio connectors if they are
copy-guarded.
To Use This Camcorder As A Recorder
(GR-D31 only)
1. Set this camcorders Power Switch y to PLAY
while pressing down the Lock Button t located on
the switch.
2. Set REC MODE to SP or LP in the Menu
Screen ( pg. 24).
3. Connect the DV cable as shown in the illustration
and load a cassette to record on.
4. Press the Recording Start/Stop button w to
engage the Record-Pause mode.
DV. IN
appears
on the screen.
GR-D31/21EK 16-27 02.12.19, 9:15 PM27
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-D31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-D31 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info