660749
24
Zoom out
Zoom in
Previous page
1/36
Next page
2424
Self-check program
This monitor has a self-check function, which allows it to detect malfunctions and alert you. This makes troubleshooting easier. Whenever a
problem occurs, one or some of the INPUT SELECT lamps will flash.
If this happens, follow the steps below and contact your dealer to resolve the problem.
The illustration of the
monitor is of DT-V21G2.
When the screen goes blank, and one or some of the INPUT SELECT lamps (COMPO., VIDEO) on the front control panel start flashing...
1 Check which lamps are flashing.
2 Press button to turn off (on standby) the monitor.
3 For DT-V21G2, DT-V17G2: Turn off the POWER switch and DC switch on the rear panel.
For DT-V24G2, DT-V17G25: Turn off the POWER switch on the rear panel.
4 For DT-V21G2, DT-V17G2: When an AC power supply is used, disconnect the AC power cord from the AC outlet.
When a DC power supply is used, detach the battery or disconnect the plug from the DC IN terminal.
For DT-V24G2, DT-V17G25: Disconnect the power cord.
5 Contact your dealer with the information about which lamps were flashing.
l
If you turn on the monitor soon after turning it off (or after a short-term power failure), the INPUT SELECT lamps may flash and no image may
be displayed.
When this happens, turn off power and wait at least 10 seconds before turning on the monitor again.
If the INPUT SELECT lamps do not flash, you can use the monitor as normal.
l The self-check function does not work when the setup menu “Standby Mode” is set to “Normal” and you turn off the monitor (put the monitor
in standby).
Cover
2
AC IN terminal
Case
1
CAUTION
l Use only the provided screws.
l Make sure the plug will not be pulled out after the cover is attached to the case.
Attaching the power cord holder
The provided power cord holder prevents accidental disconnection of the AC power cord from the AC IN terminal.
l The power cord holder consists of two parts, a case and a cover.
To detach the cover
3
Troubleshooting (cont.)
21
Attaching the Core filter (North America Only)
Using the power cord without Core filter may lead to noise.
Attach the Core filter to the AC plug end of the power cord.
3 4
Core filter
Power cord
DT-V24G2_EN.indb 24 2016/07/27 16:37:19
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DT-V17G25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DT-V17G25 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DT-V17G25

JVC DT-V17G25 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info