660749

JVC DT-V17G25 Manual

23
Zoom out
Zoom in
Previous page
1/36
Next page
2323
Troubleshooting
Solutions to common problems related to the monitor are described here. If none of the solutions presented here solve the problem, unplug the
monitor and consult an authorized dealer or service center.
Symptom Probable cause and corrective action Page
No power supply.
l
Press the button.
l (DT-V17G2/DT-V21G2 only) Firmly insert the AC power plug or DC power plug.
l (DT-V17G2/DT-V21G2 only) Turn on the POWER switch or DC switch on the rear
panel.
l (DT-V17G25/DT-V24G2 only) Firmly insert the AC power plug.
l (DT-V17G25/DT-V24G2 only) Turn on the POWER switch on the rear panel.
l When using a DC power supply, charge the battery or replace it with a charged one.
7
5
5
5
5
5
No picture with the power on.
l
Select the correct input using the INPUT SELECT buttons.
l Connect the connecting cable firmly.
l Turn on the power of the connected component and set the output correctly.
l Check whether the input signal format is acceptable on the monitor.
7
5
—
27
No sound.
l
Adjust the volume level.
l Deactivate the muting function.
l Connect the connecting cable firmly.
l Turn on the power of the connected component and set the output correctly.
l Set the correct inputs for “SDI-1 Select”, “SDI-2 Select”, “HDMI Select”, “Component
Select” and “Video Select” in “Audio Setting”.
6
6
5
—
13
“Out of range” appears.
l
Check whether the input signal format is acceptable on the monitor.
8, 27
“No Sync” appears.
l
Select the correct input using the INPUT SELECT buttons.
l Connect the connecting cable firmly.
l Turn on the power of the connected component and output video signals. Or,
check whether the video output of the component (video output setting of the VCR
or graphic board of the computer) is set correctly.
7
5
—
Wrong color, no color.
l
Adjust each picture adjustment knob on the front panel or adjust the items of
“Picture Sub Adjust” in the Set-Up Menu. Or, perform “reset” in “Picture Sub Adjust.”
l Check whether the setting of COLOR OFF or SCREENS CHECK buttons are
appropriate.
l Select the proper color system (“Color System”) in “Signal Setting”.
l Adjust the items of “White Balance Setting” in the Set-Up Menu. Or, perform “reset”
in “White Balance Setting”.
6, 16
7
12
17
The picture becomes blurred.
l
Adjust the picture contrast or brightness by using the adjustment knobs on the
front panel. Or, adjust “Contrast” or “Bright” of “Picture Sub Adjust” in the Set-Up
Menu.
6, 16
Wrong picture position, wrong picture size.
The picture may sometimes not be able to fill
the whole screen depending on the signal. In
this case, nothing can be done to solve the
problem. Please be aware of this beforehand.
l
Check whether the setting of 1:1 is appropriate.
l Check the “Aspect” settings in the Main menu.
l Check whether the input signal format is acceptable on the monitor.
l Adjust the picture size (H Size/V Size) or position (H Position/V Position) of “Size/
Position Adjust” menu.
7
11
27
11
Buttons on the monitor do not work.
l
Set “Control Lock” in the Set-Up Menu to “Off.”
l You cannot use the buttons for the items controlled by the MAKE system. Disable
the external control.
17
20
The following are not malfunctions.
l When a still image is displayed for a long time, it may remain indistinctly on the screen after the picture has changed. Though the remaining
picture will disappear after a while, there may be a case that it remains for a long period depending on the length of time the still image was
displayed for. This is due to the characteristics of the LCD display and is not a malfunction.
l Red spots, blue spots and green spots on the panel surface are a normal characteristic of LCD panel, and not a problem. The LCD panel is built
with very high precision technology; however, be aware that a few pixels may be missing or constantly lit.
l The following symptoms are problems only when pictures or sounds are not played back normally.
l A slight electric shock occurs when you touch the LCD panel.
l The top and/or rear panel of the monitor becomes hot.
l The monitor emits a cracking noise.
l The monitor emits a mechanical noise.
DT-V24G2_EN.indb 23 2016/07/27 16:37:17
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DT-V17G25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DT-V17G25 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DT-V17G25

JVC DT-V17G25 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info