660748
19
Zoom out
Zoom in
Previous page
1/36
Next page
1919
l Setting of “Character Setting”
1 Change the input to one that you want to assign a video source name for.
2 Select “Character Setting”.
3 Press
buttons to select the first character.
l Each time you press button, the character changes as follows.
Press button to reverse the order.
Space
Character Setting
4 Press button to move the arrow to the next space.
l The characters entered before moving the arrow are memorized.
5 Repeat steps 3 and 4 (10 characters at maximum).
6 Press MENU button to store the name.
Character Setting
l How to use the LCD Saver
1. Set reduced function to perform.
2. Set both time for starting the function and time for letting it work.
3. Activate the STANDBY MODE by Execute.
n Aborting the ongoing LCD Saver
Operating this apparatus may lead to aborting the OPERATION MODE.
n Stopping the operation
Executing “Cancel”. Turn off the power.
l Once operating the function, unless turned off the power or executed “Cancel”, reduced function is automatically performed every 24 hours.
n Example of setting up “1st Start” and “Work Time”
l
IMD (In-monitor Display)
This unit supports “TSL UMD Protocol – V4.0” from Television Systems Ltd.
16 character text display and one tally on each side can be controlled.
The color of both the text and the tally can be set.
Using the address setting, up to 127 units can be controlled individually.
To use, set the external control terminals of this unit to serial format.
For details of control commands, refer to the homepage of Television Systems Ltd.
l Low Power Mode
Puts the unit into Low Power Mode 30 seconds after the monitor is switched off (standby) to further reduce power consumption.
Low Power Mode will not activate when “Standby Mode” on the Set-up Menu is set to “Serial” or “SDI Out”.
The power lamp will be turned off during Low Power Mode.
Time to set in
the 1st Start
0h 2h 4h 6h 8h 10h 12h 14h 16h 18h 20h 22h 24h
Timing to run "Execute"
LCD Saver in
standby
LCD Saver in
operation
Time to set in
Work Time
CAM-01
Text display area
* Example of lower screen IMD display
Tally 2Tally 1
LCD Saver in
standby
DT-V24G2_EN.indb 19 2016/07/27 16:37:15
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DT-V17G2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DT-V17G2 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DT-V17G2

JVC DT-V17G2 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info